相关实验视频

Updated: Sep 13, 2025

Design and Characterization Methodology for Efficient Wide Range Tunable MEMS Filters

Design and Characterization Methodology for Efficient Wide Range Tunable MEMS Filters

Published on: February 4, 2018

可重新配置的Memristive近乎一次性的双频带通波器

Dejan Miljanović¹, Milka Potrebić Ivaniš², Ivo Marković²

¹Faculty of Technical Sciences, European University, 76100 Brcko, Bosnia and Herzegovina.

|July 30, 2025

概括

本研究介绍了一种紧的双频带通波器,使用可切换传输带的memristors. 这种可重新配置的过器可以在3.5GHz和5.8GHz频率的独立调节中产生最小的影响.

科学领域:

电气工程电气工程
材料科学材料科学材料科学
微波工程微波工程

背景情况:

带通波器是现代电子系统中至关重要的组件.
现有的过器往往缺乏调整性或重新配置性.
记忆电阻为电子控制应用提供独特的特性.

研究的目的:

设计和验证一款具有可切换传输带的新型双频带宽波器.
为了证明使用memristors进行过器重新配置.
通过多层技术和准块元素实现小型化.

主要方法:

使用memristors作为连接过器组件到地面的控制元件.
采用多层技术,用于减小尺寸的准一次性元素.
执行电路级模拟,然后进行3D电磁 (EM) 模拟以进行验证.

主要成果:

成功设计了一种非常小的双频带宽波器.
通过使用memristor状态,在两个传输带 (3.5GHz和5.8GHz) 上展示了独立控制.
实现了0.10 λ_g × 0.12 λ_g 的过器足迹.

结论:

拟议的memristor控制的双带波器是可行的和高度小型化的.
该设计允许独立调整单个传输带,且影响微不足道.
这项技术使得高可重构性和紧的射频过器解决方案成为可能.

关键词:

带通过波器的波器.双频段过器是什么意思记忆力转换器记忆力转换器多层技术是多层技术.可重新配置的微波波器

更多相关视频

Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators

Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators

Published on: August 15, 2014

Assembly and Characterization of Biomolecular Memristors Consisting of Ion Channel-doped Lipid Membranes

Assembly and Characterization of Biomolecular Memristors Consisting of Ion Channel-doped Lipid Membranes

Published on: March 9, 2019

相关概念视频

Active Filters

Active Filters

Active filters are electronic circuits that use operational amplifiers (op-amps), resistors, and capacitors to filter out unwanted frequency components from a signal. A first-order low-pass active filter is designed to pass signals with a frequency lower than a certain cutoff frequency and attenuate frequencies higher than that cutoff frequency. The transfer function for a first-order low-pass active filter is:

Passive Filters

Passive Filters

Passive filters are utilized to shape the frequency spectrum of signals across a diverse array of applications. These filters, using only passive elements like resistors (R), inductors (L), and capacitors (C), are capable of selectively allowing or blocking certain frequency ranges without the need for external power sources.
Low-Pass Filters
Low-pass filters are designed to transmit signals with frequencies lower than the cutoff frequency, ωc, and attenuate those above it. The cutoff...

Design Example: Capacitance Multiplier Circuit

Design Example: Capacitance Multiplier Circuit

In integrated circuit technology, a capacitance multiplier is often utilized to produce a larger capacitance value when a small physical capacitance falls short. This is achieved by a circuit that multiplies capacitance values by a factor of up to 1000, such that a 10-pF capacitor can replicate the performance of a 100-nF capacitor.
The circuit illustrated in Figure 1 below incorporates two op-amps, with the first operating as a voltage follower and the second acting as an inverting amplifier.

Bandpass Sampling

Bandpass Sampling

In signal processing, bandpass sampling is an effective technique for sampling signals that have most of their energy concentrated within a narrow frequency band. This type of signal is known as a bandpass signal. The key principle of bandpass sampling involves sampling the signal at a rate that is greater than twice the signal's bandwidth to prevent aliasing.
A bandpass signal has a spectrum with a lower frequency limit, denoted as ω1, and an upper frequency limit, denoted as ω2....

Characteristics of Series Resonant Circuit

Characteristics of Series Resonant Circuit

Series resonance occurs in a circuit containing inductive (L), capacitive (C), and resistive (R) elements connected sequentially. At the resonance frequency, the inductive and capacitive reactances are equal in magnitude but opposite in sign, effectively canceling each other. This causes the circuit's impedance is minimal, primarily determined by the resistance R. The resonant frequency of an RLC circuit is defined as:

Cascaded Op Amps

Cascaded Op Amps

Operational amplifiers (op-amps) are versatile electronic components that can be interconnected in a cascade - one after another in a linear sequence. This cascading is possible due to their infinite input resistance and zero output resistance, allowing them to maintain their input-output relationships even when connected in series.
In a cascaded system, each op-amp is referred to as a stage. The output of one stage drives the input of the subsequent stage. As the input signal passes through...