相关实验视频

Updated: Sep 12, 2025

Graphene Coatings for Biomedical Implants
13:21

Graphene Coatings for Biomedical Implants

Published on: March 1, 2013

21.4K

对Ni-Invar和Ti-6Al-4V表面的碳涂层进行研究,以获得低摩擦性能

Fatemeh Ghajari1, Mobin Vandadi1, Tabiri Kwayie Asumadu2

  • 1Department of Civil, Environmental and Architectural Engineering, Worcester Polytechnic Institute, Worcester, Massachusetts 01609-2280, United States.

Langmuir : the ACS journal of surfaces and colloids
|August 8, 2025
PubMed
概括

这项研究使用麻豆叶为Ni-Invar和Ti-6Al-4V的可持续碳涂层. 由于碳化物形成,Ni-Invar与石墨烯涂层实现了超性,而Ti-6Al-4V显示出更高的摩擦力.

更多相关视频

Preparation and High-temperature Anti-adhesion Behavior of a Slippery Surface on Stainless Steel10:52

Preparation and High-temperature Anti-adhesion Behavior of a Slippery Surface on Stainless Steel

Published on: March 29, 2018

7.7K
Fabrication of Low Temperature Carbon Nanotube Vertical Interconnects Compatible with Semiconductor Technology09:20

Fabrication of Low Temperature Carbon Nanotube Vertical Interconnects Compatible with Semiconductor Technology

Published on: December 7, 2015

7.8K

相关概念视频

Characteristics of Dry Friction01:21

Characteristics of Dry Friction

Dry friction occurs when two solid surfaces slide against each other without any lubrication or fluid present. It causes resistance when pushing objects along a surface, like a gardener pushing a wheelbarrow. The force applied to move the cart causes dry friction between the wheel and the ground.
Before the wheelbarrow starts moving, the static frictional force acts tangentially to the contact surface, opposing the force that is about to induce the motion. This frictional force prevents the...
681
Frictional Force01:07

Frictional Force

When a body is in motion, it encounters resistance because the body interacts with its surroundings. This resistance is known as friction, a common yet complex force whose behavior is still not completely understood. Friction opposes relative motion between systems in contact, but also allows us to move. Friction arises in part due to the roughness of surfaces in contact. For one object to move along a surface, it must rise to where the peaks of the surface can skip along the bottom of the...
8.4K
Design Example: Deciding Thickness of Lubricating Fluid in a Shaft01:23

Design Example: Deciding Thickness of Lubricating Fluid in a Shaft

Effective lubrication between a rotating shaft and its bearing housing is essential in rotating machinery to minimize friction, wear, and energy loss. With carefully controlled thickness and viscosity, the lubricant layer prevents metal-to-metal contact, ensuring smooth operation.
To calculate the required thickness of the lubricant layer, the tangential velocity at the shaft's surface must first be determined. This velocity is calculated by converting the rotational speed to angular...
155