相关实验视频
Updated: Sep 12, 2025

09:50
Electrochemically and Bioelectrochemically Induced Ammonium Recovery
Published on: January 22, 2015
12.8K
表面更新驱动的铜回收通过在反应堆中以旋转擦拭机制进行凝固
A S Fathalla1, E-S Z El-Ashtoukhy1, M H Abdel-Aziz2
1Chemical Engineering Department, Faculty of Engineering, Alexandria University, Alexandria, 21544, Egypt.
Scientific reports
|August 10, 2025
概括
这项研究引入了一种新型反应器,用于使用 (Zn) 凝固有效地去除铜 (Cu2+). U形的擦拭器设计增强了表面的更新和动,在短短10分钟内实现了近乎完整的铜去除.
科学领域:
- 环境工程 环境工程
- 材料科学 材料科学 材料科学
- 化学工程是化学工程的重要组成部分.
背景情况:
- 工业废水中的铜 (Cu2+) 污染对环境构成风险.
- 用 (Zn) 凝固是一种可行的铜去除方法.
- 有效的振动和表面更新对于优化水泥化速度至关重要.
研究的目的:
- 为了研究一个新的U形擦拭器反应堆对Cu2+在Zn表面的凝固的效率.
- 评估操作参数对铜去除率的影响.
- 评估开发反应堆的能源效率.
主要方法:
- 使用了带有 Zn 板的圆柱形批量动反应器.
- 一个旋转的U形擦拭器提供了同时的机械表面更新和散装动.
- 研究的变量包括擦拭器旋转速度,擦拭器直径,溶液pH值和初始CuSO度.
主要成果:
- 的Cu2+凝固率是独立于溶液pH.
- 增加擦拭器旋转速度,擦拭器直径和初始CuSO4度提高了凝固率.
- 在优化条件下,在10分钟内实现了几乎完全的Cu2+去除.
- 在低旋转速度使用大直径清洁器观察到能效.
结论:
- 这种新型的清洗器辅助反应器通过同时进行表面更新和动,显著提高了Cu2+清除效率.
- 该过程是有效和节能的,特别是优化了擦拭器尺寸和旋转速度.
- 这项技术为工业废水处理和铜回收提供了有前途的解决方案.
相关概念视频
Precipitation and Co-precipitation
2.0K
Precipitation and coprecipitation methods can be used to separate a mixture of ions in a solution. In qualitative inorganic analysis, ions that form sparingly soluble precipitates with the same reagent are separated based on the differences in solubility products. For example, consider the separation of Cu(II) and Fe(II) ions by precipitation as insoluble sulfides. First, copper(II) sulfide is precipitated by the addition of acidic H2S, where the dissociation of H2S is suppressed. Adding H2S...
2.0K
Coagulation
374
Colloidal solids are solid particles suspended in solution. They are usually negatively charged, attracting a compact primary layer of positively charged ions, which attract more counterions to form an electrical double layer. Electrostatic repulsion between the charged double layers prevents the particles from colliding, stabilizing the colloids. These solids are often undesirable because they can contain toxins that are difficult to remove. Coagulation is a technique that helps aggregate and...
374
Washing, Drying, and Ignition of Precipitates
1.1K
After filtration, the precipitate is washed to remove coprecipitated impurities and any remaining mother liquor. Colloidal precipitates, such as silver chloride, are washed with an electrolyte (such as dilute nitric acid) to prevent the peptization of the precipitate. In the case of slightly soluble precipitates, the wash solution contains a common ion to reduce solubility. Lead sulfate, which is slightly soluble in water, is washed with dilute sulfuric acid. Similarly, wash solutions may be...
1.1K

