在紫外线中,在低到中等流动水平的表面微粒的激光除引起的表面修饰
Optics express
|August 13, 2025
概括
用玻璃和微粒对化的激光切除会产生与颗粒大小成比例的石坑. 不同于玻璃颗粒,颗粒会导致显著的光强化,这是由于表面的多种变化.
科学领域:
- 材料科学 材料科学 材料科学
- 激光与材料的相互作用
- 表面工程是什么?表面工程是什么?
背景情况:
- 化是一种关键的光学材料,容易受到激光引起的损伤.
- 光学表面的微粒子污染可以引发激光损伤,损害性能.
- 了解污染物的激光除机制对于光学系统的可靠性至关重要.
研究的目的:
- 研究玻璃和微粒激光切除所产生的化二氧化表面的表面变化.
- 建立粒子特征,激光流动和由此产生的表面损伤之间的关系.
- 量化这些激光引起的损伤部位引起的光强化.
主要方法:
- 使用351 nm波长,3 ns脉冲持续时间,以及从3.5到9.4 J/cm2的流动度的激光切除实验.
- 四波侧切干扰计 (QLSI) 显微镜用于高分辨率的表面映射.
- 衍射建模以量化来自损伤部位的光强化.
主要成果:
- 观察到粒子大小和石坑大小之间的比例,受粒子类型和激光流动的影响.
- 与玻璃颗粒相比,颗粒诱导的光强度更高 (高达4.5倍).
- 颗粒在5-8J/cm2之间不一致的行为导致了不同的相位/振幅分布和高强度.
结论:
- 微粒子污染和激光流动的性质显著影响了化表面的修改.
- 颗粒污染对光学系统的光强化和潜在损伤的风险更大.
- QLSI和衍射建模是描述激光引起的损伤和光学效应的有效工具.
更多相关视频
相关概念视频
Ultraviolet and Visible (UV–Vis) Spectroscopy: Overview
Ultraviolet–visible (UV–visible or UV–Vis) spectroscopy is an analytical technique that investigates the interaction between matter and UV–Vis light within the electromagnetic spectrum. This method is widely used for its versatility, simplicity, and relatively quick data acquisition, making it valuable for both qualitative and quantitative analysis. When UV–Vis radiation passes through a material, molecules absorb light depending on the energy required for electronic transitions. As a result...
UV–Vis Spectrometers
The absorbance of UV and visible (UV–visible) radiations is measured using a UV–visible spectrophotometer. Deuterium lamps, which emit UV radiation, and tungsten lamps, which produce radiation in the visible region, are used as light sources in UV–visible spectrophotometers. A monochromator or prism is used for diffraction grating, i.e., to split the incoming radiation into different wavelengths. A system of slits is used to focus the desired wavelength on the sample cell. Samples for...
Colloidal precipitates
The high insolubility of some precipitates can result in an unfavorable relative supersaturation. This can lead to colloidal particles with a large surface-to-mass ratio, where adsorption is promoted. For instance, in the precipitation of silver chloride, silver ions are adsorbed on the surface of the colloidal particles, forming a primary layer. This layer attracts ions of opposite charge (such as nitrate ions), forming a diffuse secondary layer of adsorbed ions. This electric double layer...
Photoluminescence: Fluorescence and Phosphorescence
Photoluminescence is a process where a molecule absorbs light energy and re-emits it in the form of light. This phenomenon occurs when a substance absorbs photons, promoting its electrons to higher energy level excited states, followed by a relaxation process in which the electrons return to their original ground state energy levels and emit light. Photoluminescence is widely observed in various materials, including semiconductors, and organic and inorganic compounds.
A pair of electrons in a...
A pair of electrons in a...
Surface Tension of Fluid
Surface tension is a fundamental property of fluids, occurring at the boundary between a liquid and a gas or between two immiscible liquids. This phenomenon arises from the cohesive forces between molecules at the fluid's surface, creating an effect similar to a stretched elastic membrane. Inside each fluid, molecules are equally attracted in all directions by neighboring molecules, but surface molecules experience a net inward force, resulting in surface tension.
Surface tension varies with...
Surface tension varies with...


