在高能电容放松器铁电器中对极化和反铁扭曲的协同设计
Kun Wei1, Jianhong Duan1, He Qi2
1College of Electrical and Information Engineering, Hunan University, Changsha, Hunan, China.
Nature communications
|August 22, 2025
概括
开发一种新的化学框架的无放松铁电 (RFEs) 提高了介电能储存. 这种设计可以最大限度地减少歇斯底里,并最大限度地增加极化,从而在能源应用中获得更高的性能.
科学领域:
- 材料科学
- 固态物理
- 陶工程
背景情况:
- 无放松铁电器 (RFEs) 对介电储能具有前景.
- 在高电场下的极化歇斯底里造成的性能下降是一个关键的挑战.
研究的目的:
- 建立基于NaNbO3的RFE的化学框架,以提高储能性能.
- 在原子尺度的结构控制和宏观的能量储存特性.
主要方法:
- 基于NaNbO3的RFE的化学框架的开发.
- 用相场模拟来分析局部格子扭曲和极化行为.
- 扫描传输电子显微镜 (STEM) 来确认结构配置.
主要成果:
- 通过不均的极化和反铁扭曲实现了独特的局部格子扭曲.
- 观察到无序的极化,连续的偏移和同时存在的氧八面体倾斜.
- 显示了微不足道的歇斯底里和大,延迟的和极化.
结论:
- 设计的框架可以在无RFEs中提供出色的储能性能.
- 实现了超高的可回收能量密度 (16.48-20.08 J/cm3),能量损耗接近零 (>90%).
- 提出设计高性能无RFE用于储能的新策略.
相关概念视频
Dielectric Polarization in a Capacitor
5.0K
The presence of a dielectric medium in a capacitor not only changes the voltage and capacitance but also affects the electric field. In general, dielectrics can be of two types: polar and nonpolar. In a polar dielectric, the positive and negative charges in the molecules are separated by a distance and hence have a permanent dipole moment. In contrast, no such charge separation exists in a nonpolar dielectric, however the nonpolar molecules get polarized in the presence of an external electric...
5.0K
Spherical and Cylindrical Capacitor
5.9K
A spherical capacitor consists of two concentric conducting spherical shells of radii R1 (inner shell) and R2 (outer shell). The shells have equal and opposite charges of +Q and −Q, respectively. For an isolated conducting spherical capacitor, the radius of the outer shell can be considered to be infinite.
Conventionally, considering the symmetry, the electric field between the concentric shells of a spherical capacitor is directed radially outward. The magnitude of the field,...
Conventionally, considering the symmetry, the electric field between the concentric shells of a spherical capacitor is directed radially outward. The magnitude of the field,...
5.9K
Capacitor With A Dielectric
4.1K
Parallel plate capacitors consist of two conducting plates separated by a certain distance. However, it is mechanically difficult to hold the large plates parallel to each other without actual contact. Hence, a dielectric layer is commonly placed between the plates, which provides an easy solution for holding the plates together with a small gap and increases the capacitance of the capacitor.
Dielectrics are non-conducting materials with no free or loosely bound electrons. When a dielectric is...
Dielectrics are non-conducting materials with no free or loosely bound electrons. When a dielectric is...
4.1K
Design Example: Capacitance Multiplier Circuit
958
In integrated circuit technology, a capacitance multiplier is often utilized to produce a larger capacitance value when a small physical capacitance falls short. This is achieved by a circuit that multiplies capacitance values by a factor of up to 1000, such that a 10-pF capacitor can replicate the performance of a 100-nF capacitor.
The circuit illustrated in Figure 1 below incorporates two op-amps, with the first operating as a voltage follower and the second acting as an inverting amplifier.
The circuit illustrated in Figure 1 below incorporates two op-amps, with the first operating as a voltage follower and the second acting as an inverting amplifier.
958
Potential Due to a Polarized Object
470
A neutral atom consists of a positively charged nucleus surrounded by a negatively charged electron cloud. When placed in an external electric field, the external electric force pulls the electrons and nucleus apart, opposite to the intrinsic attraction between the nucleus and the electrons. The opposing forces balance each other with a slight shift between the center of masses of the nucleus and the electron cloud, resulting in a polarized atom. On the other hand, a few molecules, like water,...
470
Induced Electric Dipoles
4.4K
A permanent electric dipole orients itself along an external electric field. This rotation can be quantified by defining the potential energy because the external torque does work in rotating it. Then, the potential energy is minimum at the parallel configuration and maximum at the antiparallel configuration. While the former is a stable equilibrium, the latter is an unstable equilibrium.
Since the absolute value of potential energy holds no physical meaning, its zero value can be chosen as per...
Since the absolute value of potential energy holds no physical meaning, its zero value can be chosen as per...
4.4K


