一个十一级单源开关电容增压逆变器,具有减少组件应力和有限的进速电流
Alireza Poulad1, Majid Hosseinpour2, Mojtaba Najafi1
1Department of Electrical Engineering, Bushehr Branch, Islamic Azad University, Bushehr, Iran.
Scientific reports
|August 24, 2025
概括
这项研究引入了一种高效的开关电容器多层逆变器,用于直流转换为交流. 这种新型结构显著提高了输出电压,减少了电流应力和最小的损失.
科学领域:
- 电气工程
- 电力电子
- 可再生能源系统
背景情况:
- 多级逆变器对于高效的交流电转换至关重要.
- 开关电容技术为电压提升和电流压力降低提供了先进的解决方案.
- 现有拓经常面临组件应力和效率的挑战.
研究的目的:
- 提出一个新的开关电容多层逆变器结构.
- 为了实现高电压增益和11级输出波形.
- 通过优化电容器充电路径来最大限度地减少切换和导电损失.
主要方法:
- 一个新的逆变器拓利用一个直流源,10个开关,3个电容和1个二极管.
- 在不同负载条件下使用Matlab/Simulink进行模拟分析.
- 使用硬件原型进行实验验证.
主要成果:
- 拟议的结构产生11级输出电压,幅度高达输入电压的2.5倍.
- 由于电容器充电路径中最多有两个开关,因此可以降低开关的电流压力.
- 证明了在感应负荷下高效运行,并适合工业应用.
结论:
- 拟议的开关电容多层逆变器提供高效率和电压提升功能.
- 这种设计最大限度地减少了组件应力和功率损失, 性能优于现有结构.
- 经过验证的实验结果证实了该拓在工业电力转换中的有效性.
相关概念视频
01:23Voltage Doubler Circuit
848
A voltage doubler circuit integrates two main components: a clamping section and a rectifier section. The clamping section consists of a capacitor (C1) and a diode (D1), whereas the rectifier section is equipped with another diode (D2) and capacitor (C2). This circuit produces an output voltage with twice the amplitude of the sinusoidal input voltage.
848
01:20Design Example: Capacitance Multiplier Circuit
958
In integrated circuit technology, a capacitance multiplier is often utilized to produce a larger capacitance value when a small physical capacitance falls short. This is achieved by a circuit that multiplies capacitance values by a factor of up to 1000, such that a 10-pF capacitor can replicate the performance of a 100-nF capacitor.
The circuit illustrated in Figure 1 below incorporates two op-amps, with the first operating as a voltage follower and the second acting as an inverting amplifier.
The circuit illustrated in Figure 1 below incorporates two op-amps, with the first operating as a voltage follower and the second acting as an inverting amplifier.
958
01:20Half wave rectifier
1.6K
A half-wave rectifier is a fundamental circuit in electronics, designed to convert alternating current (AC) voltage into a unidirectional voltage. It utilizes the simplest form of diode rectification, where the circuit comprises a single diode in series with a load resistor and an AC power source.
1.6K
01:24Bridge rectifier
816
The bridge rectifier is essential in electronics for efficiently converting alternating current (AC) to direct current (DC). Comprised of four diodes configured in a bridge layout, this rectifier effectively processes both the positive and negative halves of the AC waveform, making it superior to half-wave and full-wave center-tapped rectifiers in terms of voltage regulation and output stability.
Operationally, the bridge rectifier allows current flow through two of its diodes during each...
Operationally, the bridge rectifier allows current flow through two of its diodes during each...
816
01:22MOSFET: Enhancement Mode
478
Enhancement-mode MOSFETs are pivotal components in electronics, distinguished by their capacity to act as highly efficient switches. They are part of the larger family of metal-oxide Semiconductor Field-Effect Transistors (MOSFETs). They are available in two types: p-channel and n-channel, each tailored to specific polarity operations.
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
478
01:27RC Circuits: Discharging A Capacitor
3.5K
One of the applications of an RC circuit is the relaxation oscillator. The relaxation oscillator comprises a voltage source, a capacitor, a resistor, and a neon lamp. The lamp acts like an open circuit (infinite resistance) until the potential difference across the neon lamp reaches a specific voltage. At that voltage, the lamp acts like a short circuit (zero resistance), and the capacitor discharges through the neon lamp and produces light. Once the capacitor is fully discharged through the...
3.5K