通过同质和异质离子交换膜传输酸盐:用于电透析应用的计时计量研究
相关实验视频
Updated: Sep 10, 2025

19:56
Introduction to Solid Supported Membrane Based Electrophysiology
Published on: May 11, 2013
15.3K
Kayo Santana-Barros1, Manuel César Martí-Calatayud1, Svetlozar Velizarov2
1IEC Group, Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM), Universitat Politècnica de València, Camí de Vera s/n, 46022, P.O. Box 22012, E-46071 València, Spain.
Membranes
|August 27, 2025
概括
这项研究比较了电透析期间在两个离子交换膜 (AMV和HC-A) 中的酸离子运输. 结果显示受pH和影响的不同行为,对于优化酸盐回收至关重要.
科学领域:
- 电化学
- 膜科学
- 环境工程
背景情况:
- 酸盐回收对于资源管理和环境保护至关重要.
- 电透析 (ED) 是离子分离和回收的一个有前途的技术.
- 了解ED膜中的离子运输机制是过程优化的关键.
研究的目的:
- 在电透析中研究通过同质 (AMV) 和异质 (HC-A) 离子交换膜的酸离子传输.
- 分析pH和水力动力学条件对膜性能的影响.
- 在不同操作条件下比较AMV和HC-A膜的行为.
主要方法:
- 使用时间电位计和电流-电压 (I-V) 分析.
- 实验是在静态和混合条件下进行的,pH值不同.
- 在电透析系统中研究了离子输送.
主要成果:
- 与HC-A不同的是,AMV膜在中性/性pH下显示同步的H2PO4和HPO42传输.
- 在低pH时AMV呈现电流和高pH时水分离;HC-A显示一致的电流.
- 动提高了限制电流密度,并降低了两种膜的阻力.
- 两种膜的pH值为7-8,观察到氨的形成,从而增加了耐药性.
结论:
- AMV和HC-A膜具有不同的酸盐传输机制和水力动力学敏感性.
- 电透析的性能受到pH值和条件的显著影响.
- 这些发现为优化基于电透析的酸盐回收过程提供了见解.
相关概念视频
Potentiometry: Membrane Electrodes
781
Membrane electrodes, also known as p-ion electrodes, use membranes that selectively interact with free analyte ions, generating a potential difference across the membrane. The resulting membrane potential, known as the asymmetry potential, is not zero even when analyte concentrations on both sides of the membrane are equal. The membrane's response is typically not selective to a single analyte but proportional to the concentration of all ions in the sample solution capable of interacting at...
781
ATP Driven Pumps I: An Overview
8.5K
ATP-driven pumps, also known as transport ATPases, are integral membrane proteins. They have binding sites for ATP located on the membrane's cytosolic side and the ion-conducting domain in the transmembrane region. These pumps use the free energy released from ATP hydrolysis to move the solutes across cell membranes against an electrochemical gradient.
There are four main types of ATP-driven pumps - P-type, V-type, F-type, and ABC transporter. All these pumps are of varying complexities and...
There are four main types of ATP-driven pumps - P-type, V-type, F-type, and ABC transporter. All these pumps are of varying complexities and...
8.5K
Ion Exchange
657
Ion exchange chromatography separates charged molecules from a solution by reversibly exchanging them with mobile, or 'active', ions associated with the oppositely charged stationary phase. This method can be used to separate ions, soften and deionize water, and purify solutions. The polymers comprising the ion-exchange column are high-molecular-weight and chemically stable polymers, crosslinked to be porous and essentially insoluble. They are also functionalized with either acidic or...
657
Pore Transport and Ion-Pair Transport
635
Pore transport and ion-pair formation are critical mechanisms for the absorption and distribution of drugs in the body.
Pore transport, also known as convective transport, is a process where small molecules like urea, water, and sugars rapidly cross cell membranes as though there were channels or pores in the membrane. Although direct microscopic evidence is limited but the concept of pores or channels is widely accepted based on physiological evidence. Despite the lack of direct...
Pore transport, also known as convective transport, is a process where small molecules like urea, water, and sugars rapidly cross cell membranes as though there were channels or pores in the membrane. Although direct microscopic evidence is limited but the concept of pores or channels is widely accepted based on physiological evidence. Despite the lack of direct...
635
Primary Active Transport
11.0K
In contrast to passive transport, active transport involves a substance being moved through membranes in a direction against its concentration or electrochemical gradient. There are two types of active transport: primary active transport and secondary active transport. Primary active transport utilizes chemical energy from ATP to drive protein pumps embedded in the cell membrane. With energy from ATP, the pumps transport ions against their electrochemical gradients—a direction they would...
11.0K
Controlled-Potential Coulometry: Electrolytic Methods
266
Controlled-potential coulometry, also known as potentiostatic coulometry, employs a three-electrode system in which the working electrode's potential is precisely regulated using a potentiostat. Platinum working electrodes are utilized for positive potentials, while mercury pool electrodes are favored for extremely negative potentials. The platinum counter electrode is separated from the analyte using a membrane or salt bridge to avoid interference in the analysis.
The chosen potential...
The chosen potential...
266

