消费前废物的无添加剂多重加工:对机械和热性能的影响
Aleksandra Nešić1, Rebeka Lorber2, Silvester Bolka2
1Faculty of Technology Novi Sad, University of Novi Sad, Bulevar cara Lazara 1, 21000 Novi Sad, Serbia.
Polymers
|August 28, 2025
概括
这项研究研究了通过10个循环再处理PLA的工业废物. 结果显示对热性能的影响很小,这表明这种多功能生物聚合物的回收可能会增加.
科学领域:
- 聚合物科学
- 材料科学
- 可持续的材料
背景情况:
- 聚乳酸 (PLA) 是一种多功能生物聚合物,其使用寿命有限,常常会在垃圾填埋场.
- 提高回收和再利用率对于充分利用PLA的潜力至关重要.
- 目前的生物降解过程需要特定的条件, 而垃圾填埋将使PLA与传统塑料相似.
研究的目的:
- 评估多个再处理周期对PLA产业废物的影响.
- 确定没有原材料或添加剂的PLA废物的回收和再循环的可行性.
- 在10个再处理周期后评估机械,热,化学和光学性能的变化.
主要方法:
- 消费前工业废物的机械削.
- 通过注射成型加工的PLA.
- 在没有原始PLA或添加剂的情况下进行10个循环再加工.
- 在每个循环后分析机械,热,化学和光学性能.
主要成果:
- 经过10个再处理周期后,分子量略有下降.
- 与原始材料相比,Poly (乳化物) 的主要热性能保持不变.
- 机械,化学和光学性能在整个再加工周期中都得到了一致的评估.
结论:
- 聚乳酸 (PLA) 通过多个再处理周期表现出弹性,具有稳定的热性能.
- 这项研究表明,工业废物的回收和再循环可能会增加.
- 进一步的研究可以探索减轻再加工过程中的分子量减少的方法.
相关概念视频
Polymer Classification: Architecture
2.9K
Polymers are classified as linear or branched on the basis of their chain architecture. The polymer chains in linear polymers have a long chain-like structure with minimal to no branching at all. Even if a polymer features large substituent groups on the monomer, which appear as branches to the skeleton, it is not considered a branched polymer. A branched polymer contains secondary polymer chains that arise from the main polymer chain. The branching occurs when the polymer growth shifts from...
2.9K
Types of Step-Growth Polymers: Polyesters
2.3K
The introduction of polyesters has brought major development to the textile industry. The wrinkle-free behavior of polyester blends has eliminated the need for starching and ironing clothes.
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...
2.3K
Plastic Behavior
261
A material's elastic behavior is characterized by the disappearance of stress once the load is removed, allowing the material to return to its original state. However, when stress surpasses the yield point, yielding commences, marking the onset of plastic deformation or permanent set. This change from elastic to plastic behavior is influenced by the peak stress value and the duration before the load is removed. An intriguing observation occurs when a specimen is loaded, unloaded, and...
261


