相关实验视频

Updated: Sep 9, 2025

In situ Grazing Incidence Small Angle X-ray Scattering on Roll-To-Roll Coating of Organic Solar Cells with Laboratory X-ray Instrumentation

In situ Grazing Incidence Small Angle X-ray Scattering on Roll-To-Roll Coating of Organic Solar Cells with Laboratory X-ray Instrumentation

Published on: March 2, 2021

流体上的光:在卷轴流体逆变器中从酸中合成连续的桑染料

Anikesh Tripathi¹, Surja Kanta Pal², Swapna Patel¹

¹Department of Chemical Engineering and Biochemical Engineering, Rajiv Gandhi Institute of Petroleum Technology, An Institution of National Importance, Government of India, Jais, Uttar Pradesh, 229304, India.

|August 28, 2025

概括

透明卷状流量逆变器 (CFI) 允许有机分子进行高效的连续流量凝结反应. 这项研究使用CFI优化了酸凝结,产生了一种绿色发射的桑类似物.

科学领域:

有机化学
化学工程
材料科学

背景情况:

透明卷流逆变器 (CFI) 与不透明反应器相比具有优势,但在凝结反应方面尚未得到充分研究.
连续流合成为化学过程提供了增强的控制和可扩展性.

研究的目的:

使用透明卷状流量逆变器 (CFI) 调查酸的连续流量凝结反应.
通过流化学优化绿色排放性桑模拟物的生产.
展示基于CFI的流量反应器的定制性和经济性.

主要方法:

使用透明卷轴式变流器 (CFI),内部直径为4毫米,用于连续流合成.
通过连接CFI来改变反应器的长度,以达到所需的停留时间.
使用实时成像来监测反应动态和产品形成.
优化反应参数包括温度,流量和停留时间.

主要成果:

在二甲基甲胺中成功合成了绿色发射的桑类似物.
确定最佳条件: 190°C, 5 mL/h 流量, ~14 h 停留时间, 4.46 W/m2 热量流量以最大限度地提高产品产量.
由于存在蒸汽-液态相界,观察到产品产量增加,增加了界面面积.

结论:

与不透明反应器相比,透明卷流逆变器 (CFI) 对连续流冷凝反应有效,提供更好的洞察力.
基于CFI的流量反应器可用于合成有机排放物,并且具有成本效益.
这项研究强调了CFI在可扩展和高效的有机合成方面的潜力.

关键词:

卷轴流量逆变器凝结反应连续流合成热传递对刺激有反应的光体

更多相关视频

Scale-up Chemical Synthesis of Thermally-activated Delayed Fluorescence Emitters Based on the Dibenzothiophene-S,S-Dioxide Core

Scale-up Chemical Synthesis of Thermally-activated Delayed Fluorescence Emitters Based on the Dibenzothiophene-S,S-Dioxide Core

Published on: October 24, 2017

Microwave-assisted Intramolecular Dehydrogenative Diels-Alder Reactions for the Synthesis of Functionalized Naphthalenes/Solvatochromic Dyes

Microwave-assisted Intramolecular Dehydrogenative Diels-Alder Reactions for the Synthesis of Functionalized Naphthalenes/Solvatochromic Dyes

Published on: April 1, 2013

相关概念视频

Fluorescence and Phosphorescence: Instrumentation

Fluorescence and Phosphorescence: Instrumentation

Fluorometers and spectrofluorometers are two types of instruments used for measuring molecular fluorescence. These instruments differ in how they select excitation and emission wavelengths and the type of light sources they utilize. Fluorometers use absorption interference filters to choose excitation and emission wavelengths. The excitation source in a fluorometer is typically a low-pressure mercury vapor lamp that emits intense lines distributed throughout the ultraviolet and visible regions.