相关实验视频

Updated: Sep 9, 2025

Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer
08:29

Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer

Published on: January 10, 2017

9.2K

通过双加热策略选择调整散热连接形态,实现19%以上的效率聚合物太阳能电池

Yi Chen1, Kun Li2, Jing Zhang3

  • 1Key Laboratory of Advanced Materials Chemistry and Devices (AMCDLab) of the Department of Education of Inner Mongolia Autonomous Region, College of Chemistry and Environment Science, Inner Mongolia Normal University, Hohhot, 010022, China.

Small methods
|September 4, 2025
PubMed
概括

一种新的双加热策略精确地控制有机太阳能电池的形态, 将功率转换效率提高到19.23%, 并提高稳定性. 这种方法为高效和稳定的散装异质连接有机太阳能电池提供了新的途径.

关键词:
在CS2膜形态学没有富勒有机太阳能电池小分子受体使用溶剂回火

更多相关视频

Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization07:32

Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization

Published on: January 29, 2017

11.2K
Developing High Performance GaP/Si Heterojunction Solar Cells10:31

Developing High Performance GaP/Si Heterojunction Solar Cells

Published on: November 16, 2018

7.6K

相关概念视频

P-N junction01:11

P-N junction

A p-n junction is formed when p-type and n-type semiconductor materials are joined together. At the interface of the p-n junction, holes from the p-side and electrons from the n-side begin to diffuse into the opposite sides due to the concentration gradient. This diffusion of carriers leads to a region around the junction where there are no free charge carriers, known as the depletion region. The charge density within the depletion region for the n-side and p-side can be described by the...
673