这页已由机器翻译。其他页面可能仍然显示为英文。
View in English
"虚拟DCCT#3:HbA1c和CGM指标与心血管结果的关系"
These videos have been matched automatically. Contact us if they are not relevant.
These videos have been matched automatically. Contact us if they are not relevant.
相关概念视频
471
Virtual work is a powerful method used to solve problems involving several connected rigid bodies. When the system is in equilibrium, virtual work is zero. This allows the calculation of the resulting forces when a system undergoes a virtual displacement. When attempting to analyze such a system, first, use a free-body diagram, where an independent coordinate represents the configuration of the links, and mark its deflected position resulting from the positive virtual displacement.
Next,...
1.3K
The principle of virtual work is an essential concept in the field of mechanics and engineering. This is used to solve problems related to the equilibrium of a structure or system. It is based on the assumption that if a system is in equilibrium, the work done by all the forces during a virtual displacement is zero. This principle is applied by considering virtual displacements of the system and the corresponding work done by internal and external forces.
To apply the principle of virtual work,...
944
The principle of virtual work states that if a body is in static and dynamic equilibrium, then the sum of all the virtual work done by all external forces and couple moments for any given virtual displacement must be zero.
In static equilibrium, a body can experience an imaginary or virtual movement, such as displacement or rotation. The virtual work done by a force is equal to the dot product of force and virtual displacement in the direction of the force. When it comes to virtually rotating a...
81
To achieve precise distance measurements, especially in surveying and construction, certain corrections must be applied to account for potential sources of error like the standardization errors, temperature variations, and slope adjustments.Standardization error emerges when measurement equipment undergoes changes, such as wear, repairs, or weather impacts. To address this, surveyors compare the equipment’s readings to a standard. This process identifies any deviation that might lead to...
743
In a delta-delta configuration, the source and the load are connected in a delta manner, forming a closed loop that divides the network into three distinct phases. This configuration makes the phase voltages identical to line voltages. Assuming the sources are in positive sequence, the phase voltages can be expressed directly without having a neutral wire.
The phase currents in a delta-connected load are calculated by dividing the phase voltage by the load impedance per phase:
In this...
462
In the delta-wye circuit, the source is delta-connected, while the load is in a wye configuration. This means that the phase voltage of the delta-connected source is equal to the line voltage of the wye-connected load. The connection between two-line currents originates from the delta-connected source. The phase difference in the balanced system allows for calculating one line current given the other, utilizing the positive sequence of phases. In the delta-wye system, the phase currents in the...