在废弃活性污泥预加厚过程中聚合物的命运和功能:对消化,质和脱水能力的影响
Seyedali Tabatabaei1, Stephan Tait2, Catherine A Rees3
1ARC Training Centre for the Transformation of Australia's Biosolids Resource, RMIT University, Bundoora, VIC, Australia; Chemical and Environmental Engineering, School of Engineering, RMIT University, Melbourne, Victoria, 3001, Australia.
The Science of the total environment
|September 19, 2025
概括
在无氧消化之前,战略性聚合物添加改善了污泥脱水,并增强了生物气生产. 谨慎的剂量优化了甲产量,减少了聚合物使用,支持可持续的废水处理.
科学领域:
- 环境工程 环境工程
- 生物技术是生物技术.
- 废物管理 废物管理
背景情况:
- 浮性聚合物对于污泥预处理至关重要,影响无氧消化过程.
- 了解聚合物在消化过程中的命运对于优化污泥管理至关重要.
- 聚合物会影响污泥的风湿学,甲产量,挥发性固体的破坏和脱水能力.
研究的目的:
- 在无氧消化之前评估合成和生物聚合物剂量的效果.
- 评估对污泥风学,甲产量,挥发性固体 (VS) 破坏和脱水能力的影响.
- 确定最佳的聚合物剂量策略,以加强污泥处理.
主要方法:
- 在无氧消化之前给定合成粉末,合成液态聚合物和粉末生物聚合物的剂量.
- 测量污泥风学变化,甲产量和VS破坏.
- 分析消化后的脱水性和残留聚合物效应.
主要成果:
- 最佳的聚合物剂量减少了20-40%的产量压力,并提高了15-25%的甲产量.
- 聚合物对甲产量做出了显著的贡献,对脱水 (10-36%) 有剩余的影响.
- 过量服用,特别是生物聚合物,抑制了由于生物质聚合而导致的VS破坏.
结论:
- 在无氧消化之前,战略性聚合物剂量可提高生物气的产生和脱水能力.
- 优化剂量将聚合物使用量降至最低,从而实现成本效益高且可持续的污泥处理.
- 仔细管理聚合物添加是必要的,以避免对VS破坏的负面影响.
相关概念视频
Coagulation
1.2K
Colloidal solids are solid particles suspended in solution. They are usually negatively charged, attracting a compact primary layer of positively charged ions, which attract more counterions to form an electrical double layer. Electrostatic repulsion between the charged double layers prevents the particles from colliding, stabilizing the colloids. These solids are often undesirable because they can contain toxins that are difficult to remove. Coagulation is a technique that helps aggregate and...
1.2K
Superplasticizers
313
Superplasticizers are advanced admixtures that enhance the workability of concrete by lowering the water content without compromising the strength of the material. These substances are highly effective water reducers, improving concrete flow, making it easier to work with, and enabling concrete to reach inaccessible areas or densely reinforced sections without mechanical vibration. The key components in superplasticizers are either sulfonated melamine or naphthalene formaldehyde condensates,...
313
Colloidal precipitates
5.4K
The high insolubility of some precipitates can result in an unfavorable relative supersaturation. This can lead to colloidal particles with a large surface-to-mass ratio, where adsorption is promoted. For instance, in the precipitation of silver chloride, silver ions are adsorbed on the surface of the colloidal particles, forming a primary layer. This layer attracts ions of opposite charge (such as nitrate ions), forming a diffuse secondary layer of adsorbed ions. This electric double layer...
5.4K
Factors Affecting Solubility
36.7K
Compared with pure water, the solubility of an ionic compound is less in aqueous solutions containing a common ion (one also produced by dissolution of the ionic compound). This is an example of a phenomenon known as the common ion effect, which is a consequence of the law of mass action that may be explained using Le Chȃtelier’s principle. Consider the dissolution of silver iodide:
36.7K
Plasticizers
340
Water-reducers, or plasticizers, are chemical admixtures used in concrete to improve strength and workability. These additives reduce the water-cement ratio without compromising workability, lower the cement content while maintaining the same workability, or increase workability to assist concrete placement in inaccessible areas.
Plasticizers function by using surface-active agents to create repulsive electrostatic forces between cement particles. This dispersion enhances the concrete's...
Plasticizers function by using surface-active agents to create repulsive electrostatic forces between cement particles. This dispersion enhances the concrete's...
340
Colloids
20.7K
Children at play often make suspensions such as mixtures of mud and water, flour and water, or a suspension of solid pigments in water known as tempera paint. These suspensions are heterogeneous mixtures composed of relatively large particles that are visible to the naked eye or can be seen with a magnifying glass. They are cloudy, and the suspended particles settle out after mixing. On the other hand, a solution is a homogeneous mixture in which no settling occurs and in which the dissolved...
20.7K


