闭环共振密度传感器设计使用电磁刺激和磁探测
Jingyue Zhang1, Lvjian Li1,2, Jintao Wang1
1National Institute of Metrology, Beijing 100029, China.
Sensors (Basel, Switzerland)
|September 27, 2025
概括
这项研究介绍了一种新型的共振密度传感器,该传感器使用高压U管. 传感器在测量流体密度方面表现出高精度和稳定性.
科学领域:
- 传感器技术 传感器技术
- 材料科学 材料科学 材料科学
- 物理 物理学 物理
背景情况:
- 共振传感器为物理属性测量提供高灵敏度.
- 机电传导是集成传感器设计的关键.
- 高压U管为共振传感提供了独特的几何形状.
研究的目的:
- 开发和分析一种新的共振密度传感器.
- 为了研究电机传导原理.
- 通过模拟和测量来验证传感器的性能.
主要方法:
- 使用高压U管作为共振传感元件.
- 使用电磁激发和磁电检测进行转导.
- 使用ANSYS电子和工作台进行模拟.
- 在开环和闭环模式下测量振幅频率特征和稳定性.
主要成果:
- 在开放循环模式下实现了大于1000的质量因子.
- 在各种流体负载下证明了测量稳定性.
- 在闭环模式下获得了大约-0.1 Hz·kg-1·m3的灵敏度.
- 报告了±1kg/m3内的绝对误差,用于密度校正.
结论:
- 响应密度传感器的集成协同设计是有效的.
- 传感器具有高精度和稳定性,可实时测量密度.
- 使用的机电传导方法适用于密度传感应用.
更多相关视频
06:17Quantifying the Relative Thickness of Conductive Ferromagnetic Materials Using Detector Coil-Based Pulsed Eddy Current Sensors
Published on: January 16, 2020
6.1K
05:11High-precision Electromagnetic Flowmeter with Empty Pipe Detection via Complex Programmable Logic Device-based Waveform Recognition
Published on: June 27, 2025
658
相关概念视频
Magnetic Damping
1.0K
Eddy currents can produce significant drag on motion, called magnetic damping. For instance, when a metallic pendulum bob swings between the poles of a strong magnet, significant drag acts on the bob as it enters and leaves the field, quickly damping the motion.
If, however, the bob is a slotted metal plate, the magnet produces a much smaller effect. When a slotted metal plate enters the field, an emf is induced by the change in flux; however, it is less effective because the slots limit the...
If, however, the bob is a slotted metal plate, the magnet produces a much smaller effect. When a slotted metal plate enters the field, an emf is induced by the change in flux; however, it is less effective because the slots limit the...
1.0K
Design Example: Underdamped Parallel RLC Circuit
625
Consider designing an oscillator circuit, a crucial component in various electronic devices and systems. The objective is to create an oscillator circuit with specific characteristics: a damped natural frequency of 4 kHz and a damping factor of 4 radians per second. To accomplish this, a parallel RLC circuit is employed, known for its ability to sustain oscillations at a resonant frequency. In this case, the damping factor is pivotal in achieving the desired performance.
Starting with a fixed...
Starting with a fixed...
625
The Hall Effect
4.1K
Edwin H. Hall, in the year 1879, devised an experiment that could be used to identify the polarity of the predominant charge carriers in a conducting material. From a historical perspective, this experiment was the first to demonstrate that the charge carriers in most metals are negative.
4.1K
Standing Waves in a Cavity
1.4K
A household microwave and lasers are examples of standing electromagnetic waves in a cavity. When two conducting metal plates are placed parallel at the nodal planes, it creates a cavity where standing waves are formed. The cavity between the two planes is analogous to a stretched string held at the points x = 0 and x = L. Here, the distance 'L' between the two planes must be an integer multiple of half of the wavelength. The wavelengths that satisfy this condition are given by:
1.4K
Double Resonance Techniques: Overview
705
Double resonance techniques in Nuclear Magnetic Resonance (NMR) spectroscopy involve the simultaneous application of two different frequencies or radiofrequency pulses to manipulate and observe two distinct nuclear spins. One important application of double resonance is spin decoupling, which selectively suppresses coupling with one type of nucleus while observing the NMR signal from another nucleus, simplifying the spectrum and enhancing resolution.
Spin decoupling is usually achieved by...
Spin decoupling is usually achieved by...
705
Energy In A Magnetic Field
2.7K
If a magnetic field is sustained, there must be a current in a closed circuit or loop, implying some energy has been spent in creating the field. If this energy is not dissipated via the circuit's resistance, it is stored in the field.
Take an ideal inductor with zero resistance. Although it's practically impossible, assume that the coil's resistance is so small that it is practically negligible. The loss of the field's energy to dissipate thermal energy (or heat) is thus...
Take an ideal inductor with zero resistance. Although it's practically impossible, assume that the coil's resistance is so small that it is practically negligible. The loss of the field's energy to dissipate thermal energy (or heat) is thus...
2.7K
