合成分子印记聚合物,用于从污染的废水中高度选择性地吸附硫
Sina Zamani1, Mohammad Mehdi Rahmani Shamsi1, Amir Hossein Javid2
1Faculty of Natural Resources and Environment, Islamic Azad University Science and Research Branch, Tehran, Iran.
Environmental geochemistry and health
|October 4, 2025
概括
一种新型的分子印记聚合物 (MIP) 有效地从水中去除硫沙拉 (SSZ). 这种可重复使用的吸附剂具有很高的选择性和容量,为制药污染物清除提供了一个有前途的解决方案.
科学领域:
- 聚合物科学 聚合物科学
- 环境化学环境化学
- 材料科学 材料科学 材料科学
背景情况:
- 像硫素 (SSZ) 这样的药物是水生环境中新出现的污染物.
- 有效的清除策略对于减轻药物残留对环境的影响至关重要.
研究的目的:
- 合成和表征一种分子印记聚合物 (MIP) 用于选择性硫沙拉 (SSZ) 吸附.
- 调查SSZ从水溶液中去除MIP的吸附性能和机制.
主要方法:
- 批量聚合技术用于MIP合成.
- 使用SEM,XRD,BET/BJH,TGA和pHPZC分析进行表征.
- 在不同的SSZ度,MIP质量,温度,pH值和接触时间下对吸附的系统研究.
主要成果:
- 在pH7,0.8g/L的MIP剂量和75分钟内10mg/L的SSZ初始度达到最佳的去除效率.
- 在Langmuir单层吸附后,最大吸附能力在50°C达到284.5mg/g.
- 吸附遵循伪二次动力学,是自发的和内热的.
- 在5个再生周期后,MIP保持了93%以上的容量,并且显示出SSZ对其他药物的高选择性.
结论:
- 合成的MIP是一种高效,选择性和可重复使用的吸附剂,用于硫沙拉去除.
- 这种材料在处理药物污染的废水方面具有显著的潜力.
- 该研究强调了MIP在应对复杂的环境污染挑战方面的有效性.
相关概念视频
Factors Affecting Solubility
Compared with pure water, the solubility of an ionic compound is less in aqueous solutions containing a common ion (one also produced by dissolution of the ionic compound). This is an example of a phenomenon known as the common ion effect, which is a consequence of the law of mass action that may be explained using Le Chȃtelier’s principle. Consider the dissolution of silver iodide:
Colloidal precipitates
The high insolubility of some precipitates can result in an unfavorable relative supersaturation. This can lead to colloidal particles with a large surface-to-mass ratio, where adsorption is promoted. For instance, in the precipitation of silver chloride, silver ions are adsorbed on the surface of the colloidal particles, forming a primary layer. This layer attracts ions of opposite charge (such as nitrate ions), forming a diffuse secondary layer of adsorbed ions. This electric double layer...
Washing, Drying, and Ignition of Precipitates
After filtration, the precipitate is washed to remove coprecipitated impurities and any remaining mother liquor. Colloidal precipitates, such as silver chloride, are washed with an electrolyte (such as dilute nitric acid) to prevent the peptization of the precipitate. In the case of slightly soluble precipitates, the wash solution contains a common ion to reduce solubility. Lead sulfate, which is slightly soluble in water, is washed with dilute sulfuric acid. Similarly, wash solutions may be...
Precipitation and Co-precipitation
Precipitation and coprecipitation methods can be used to separate a mixture of ions in a solution. In qualitative inorganic analysis, ions that form sparingly soluble precipitates with the same reagent are separated based on the differences in solubility products. For example, consider the separation of Cu(II) and Fe(II) ions by precipitation as insoluble sulfides. First, copper(II) sulfide is precipitated by the addition of acidic H2S, where the dissociation of H2S is suppressed. Adding H2S...
Coagulation
Colloidal solids are solid particles suspended in solution. They are usually negatively charged, attracting a compact primary layer of positively charged ions, which attract more counterions to form an electrical double layer. Electrostatic repulsion between the charged double layers prevents the particles from colliding, stabilizing the colloids. These solids are often undesirable because they can contain toxins that are difficult to remove. Coagulation is a technique that helps aggregate and...
Gravimetry: Inorganic And Organic Precipitating Agents
In gravimetry, the precipitant is chosen carefully to obtain a pure solid that can be easily filtered. Common inorganic precipitants can be used to determine several cations and anions. In some cases, the formation of the same precipitate can be used to determine the cation and the anion. For example, the reaction of barium and chromate ions to give barium chromate is used to determine both barium and chromate. However, precipitates such as hydroxides, oxalates, and metal ammonium phosphates...


