相关实验视频

Updated: Jul 1, 2026

Preparation of Biopolymer Aerogels Using Green Solvents
08:13

Preparation of Biopolymer Aerogels Using Green Solvents

Published on: July 4, 2016

18.2K

热水处理以增强超临界的CO2聚烯酸泡过程用于组织工程支架

Belén García-Jarana1, Diego Valor1, Ignacio García-Casas1

  • 1Department of Chemical Engineering and Food Technology, Faculty of Sciences, Wine and Agrifood Research Institute (IVAGRO), University of Cadiz, 11510 Cadiz, Spain.

Polymers
|November 27, 2025
PubMed
概括

水热预处理通过超临界二氧化碳泡显著增强用于组织工程的聚烯酸 (PCL) 支架的孔隙性. 这种无溶剂的方法改善了用于再生医学应用的脚手架结构和机械性能.

关键词:
二氧化碳二氧化碳二氧化碳有泡的发泡.聚卡普罗拉克托尼是一种多重的产物.聚合物是一种聚合物.脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架,脚手架.

更多相关视频

Expansion of Two-dimension Electrospun Nanofiber Mats into Three-dimension Scaffolds06:14

Expansion of Two-dimension Electrospun Nanofiber Mats into Three-dimension Scaffolds

Published on: January 7, 2019

7.3K
Microfluidic Fabrication Techniques for High-Pressure Testing of Microscale Supercritical CO2 Foam Transport in Fractured Unconventional Reservoirs10:06

Microfluidic Fabrication Techniques for High-Pressure Testing of Microscale Supercritical CO2 Foam Transport in Fractured Unconventional Reservoirs

Published on: July 2, 2020

7.2K

相关概念视频

Coagulation01:06

Coagulation

Colloidal solids are solid particles suspended in solution. They are usually negatively charged, attracting a compact primary layer of positively charged ions, which attract more counterions to form an electrical double layer. Electrostatic repulsion between the charged double layers prevents the particles from colliding, stabilizing the colloids. These solids are often undesirable because they can contain toxins that are difficult to remove. Coagulation is a technique that helps aggregate and...
Carbonation Shrinkage01:24

Carbonation Shrinkage

Atmospheric CO2 penetrates the concrete's pores and, in the presence of moisture, forms carbonic acid, which then reacts with calcium hydroxide in the hydrated cement, forming calcium carbonate. This process reduces the concrete's volume and is termed carbonation shrinkage.
The concrete's permeability is slightly reduced as calcium carbonate produced during the reaction fills its pores. Furthermore, its strength is slightly enhanced as the water released during the reaction facilitates the...
Turbulent Flow: Problem Solving01:09

Turbulent Flow: Problem Solving

Carbonation is a process used to dissolve carbon dioxide gas in a liquid, commonly used in the production of carbonated beverages. Achieving efficient carbonation requires careful control of temperature, pressure, and flow conditions. By adjusting these parameters, carbonation efficiency can be maximized, producing a higher concentration of CO2 in the liquid.
Temperature is a key factor in CO2 solubility. In this case, the CO2 gas and the liquid are cooled to 20°C. Lower temperatures enhance...
Microbial Wastewater Treatment01:30

Microbial Wastewater Treatment

Microbial communities in aquatic ecosystems play a key role in the natural breakdown of contaminants introduced through domestic and industrial effluents. Acting as biological catalysts, these microbes change and mineralize a wide range of organic and inorganic pollutants under different redox conditions.In oxygen-rich surface waters, aerobic heterotrophs lead organic matter breakdown, using oxygen as the terminal electron acceptor to efficiently oxidize substrates to carbon dioxide and water.
Bioreactor Controls-II01:18

Bioreactor Controls-II

In aerobic fermentations, oxygen is vital for microbial growth and metabolite production. Since air comprises only about 20% oxygen and the gas is poorly soluble in water—just 9 ppm at 20°C—supplying sufficient oxygen becomes a critical challenge, especially in high-demand processes like yeast growth or citric acid production. Even a fully saturated broth may offer only a few seconds of oxygen availability.To address this, sterile or scrubbed air is introduced into the fermentor via a sparger...
Scale-Up Processes01:14

Scale-Up Processes

The scale-up of microbial fermentation processes is essential in industrial biotechnology, allowing the transition from laboratory-scale experiments to commercial-scale production while aiming to maintain product yield and quality. This process requires meticulous adjustment of equipment design, process parameters, and contamination control strategies to accommodate increasing culture volumes.At the laboratory scale, cultures are typically maintained in 1 to 10-liter glass or autoclavable...