错位对光纤高铁计收集的功率的影响
Salvador Vargas1, Alberto Tapetado2, Carmen Vázquez2
1Electrical Engineering Faculty, Universidad Tecnológica de Panamá, Ave. Universidad Tecnológica, El Dorado, Panamá 0819-07289, Panama.
Sensors (Basel, Switzerland)
|November 27, 2025
概括
这项研究模拟了光纤高 pyrometers 的错位,这对于先进制造业中准确的温度测量至关重要. 精确的对齐可以最大限度地减少错误,确保可靠的光学功率采集,并减少热量测量的不准确性.
科学领域:
- 光学工程是指光学工程.
- 计量学 计量学 计量学
- 热量测量 热量测量
背景情况:
- 光纤热度计对于非接触式温度测量至关重要.
- 光学系统的错位可能导致显著的测量错误.
- 精确的校准对于在工业应用中可靠的高 pyrometer 性能至关重要.
研究的目的:
- 开发一种模型,分析光纤光学度仪中的光功率错位.
- 为了研究倾斜角度和横移对测量准确性的影响.
- 为在先进制造业中改进对齐和校准程序提供见解.
主要方法:
- 根据纤维参数 (直径,数值孔径),目标大小和距离,开发了一个理论模型.
- 进行了模拟,以评估倾斜角度和横移的联合影响.
- 该模型结合了辐射率角度的依赖性,用于全面分析.
主要成果:
- 分析了倾斜角度和横移对光学功率的同时影响.
- 15微米以下的侧向错位对160微米物体大小和60°倾斜的物体的影响是微不足道的.
- 移位的影响因固定倾斜角度的方向而异.
结论:
- 开发的模型提供了关键的洞察力,用于对准光纤高 pyrometers.
- 了解错位效应对于避免温度测量错误至关重要.
- 这项研究有助于优化用于先进制造工艺的高 pyrometer 校准.
关键词:
排放率 排放率 排放率 排放率有限热点有限的热点.侧移位移是指侧移位移的时间.计量学 计量学 计量学 计量学错位效应是错位效应造成的.建模建模模型是什么光纤传感器是一种光纤传感器.一个高 pyrometer 的仪表.温度的温度的温度的温度的温度倾斜角度倾斜角度的倾斜角度更多相关视频
08:48Low-cost Custom Fabrication and Mode-locked Operation of an All-normal-dispersion Femtosecond Fiber Laser for Multiphoton Microscopy
Published on: November 22, 2019
8.0K
09:18Laser-heating and Radiance Spectrometry for the Study of Nuclear Materials in Conditions Simulating a Nuclear Power Plant Accident
Published on: December 14, 2017
10.9K
相关概念视频
01:17Common Leveling Mistakes and Errors
381
A survey team is tasked with determining the elevation difference between points Point A and Point B, separated by uneven terrain. They use a leveling instrument and a leveling rod.Common MistakesMisreading the Rod: During a backsight reading at Point A, the instrumentman observes the rod partially obscured by tall grass. Instead of reading 1.135 m, they mistakenly record 1.735 m due to the misalignment of the crosshair with the wrong graduation. This error adds 0.600 m to all subsequent...
381
01:18Errors in Taping
299
Errors in taping arise from multiple factors that can significantly impact measurement accuracy in surveying. Misalignment of the tape, often due to human error, is one primary source. A skilled rear tapeman, using a telescope, can help correct alignment by guiding the head tapeman; however, human limitations still lead to small inaccuracies. These errors may include misplacement of pins or inaccurate tape readings due to common visual confusions, such as mistaking a six for a nine. Such...
299
01:11Power Factor
669
The power factor is defined as the ratio of average (or active) power to apparent power, as illustrated by the relation
669