温度和材料厚度对废物存系统中青地质膜 (BGM) 扩散特性的影响
1GeoEngineering Centre at Queen's-RMC, Queen's University, Kingston, ON K7L 3N6, Canada.
Waste management (New York, N.Y.)
|December 27, 2025
概括
抗根聚 (PET) 薄膜显著抵御弹性青地质膜 (BGMs) 中挥发性有机化合物 (VOC) 迁移. 温度增加VOC扩散,但PET薄膜和BGM厚度是阻隔屏障性能的关键因素.
科学领域:
- 地质技术工程 地质技术工程
- 环境科学 环境科学
- 材料科学 材料科学 材料科学
背景情况:
- 弹性青地质膜 (BGMs) 用于固体废物储存.
- 了解它们作为扩散屏障的表现对于环境保护至关重要.
- 温度,厚度和配方对扩散的作用需要研究.
研究的目的:
- 为了研究弹性青地质膜 (BGMs) 的扩散行为.
- 评估温度,厚度和配方对BGM性能的影响.
- 评估抗根聚 (PET) 薄膜对扩散电阻的贡献.
主要方法:
- 在24°C,35°C和50°C的温度下对BGM及其组件进行了扩散试验.
- 使用双层建模方法来分析扩散参数.
- 实验数据被用来生成和验证理论度概况.
主要成果:
- 挥发性有机化合物 (VOC) 的扩散随温度增加.
- 聚乙烯薄膜提供了对VOC迁移的主要抵抗力.
- 较厚的BGM显示出更长的平衡时间,表明透率降低.
结论:
- BGM的扩散性能高度依赖于温度和PET薄膜的特性.
- 对特定材料的组合测试对于准确的扩散性能的评估至关重要.
- 这些发现对于在固体废物管理中设计有效的封闭屏障系统至关重要.
相关概念视频
Masonry in Cold and Hot Weather Conditions
310
In cold weather, masonry construction requires specific precautions to ensure mortar does not freeze before curing, as this can significantly weaken its strength and watertightness. Mortar temperature should be maintained between 60°F and 80°F to support proper hydration and curing. Below 40°F, mortar water must be heated, but should not exceed 120°F as high temperatures can reduce mortar's compressive and bond strength.
Other key practices include keeping masonry units...
Other key practices include keeping masonry units...
310
Thermal Sigmatropic Reactions: Overview
2.4K
Sigmatropic rearrangements are a class of pericyclic reactions in which a σ bond migrates from one part of a π system to another. These are intramolecular rearrangements where the total number of σ and π bonds remain unchanged.
Sigmatropic shifts are classified based on an order term [i, j ], where i and j indicate the number of atoms across which each end of the σ bond migrates. Below are examples of a [3,3] sigmatropic shift in 1,5-hexadiene, referred...
Sigmatropic shifts are classified based on an order term [i, j ], where i and j indicate the number of atoms across which each end of the σ bond migrates. Below are examples of a [3,3] sigmatropic shift in 1,5-hexadiene, referred...
2.4K
Thermal expansion and Thermal stress: Problem Solving
2.0K
San Francisco's Golden Gate Bridge is exposed to temperatures ranging from -15 °C to 40 °C. At its coldest, the main span of the bridge is 1275 m long. Assuming that the bridge is made entirely of steel, what is the change in its length between these temperatures?
To solve the problem, first, identify the known and unknown quantities. The initial length (L) of the bridge is 1275 m, the coefficient of linear expansion (α) for steel is 12 x 10-6/°C, and the change in temperature (ΔT) is 55...
To solve the problem, first, identify the known and unknown quantities. The initial length (L) of the bridge is 1275 m, the coefficient of linear expansion (α) for steel is 12 x 10-6/°C, and the change in temperature (ΔT) is 55...
2.0K
Design Example: Managing Concrete Workability
275
This example deals with managing the workability of concrete for a raft foundation project under hot weather conditions. Workability is crucial for ensuring the concrete is easy to place, compact, and finish. In this scenario, a slump test — a common method to measure the workability of fresh concrete — initially indicated low workability. This was attributed to the rapid water loss from the concrete mix, exacerbated by the high temperatures causing the course aggregates to heat up.
275
Effect of Temperature Change on Reaction Rate
4.9K
The Arrhenius equation,
4.9K
Effects of Temperature on Free Energy
27.9K
The spontaneity of a process depends upon the temperature of the system. Phase transitions, for example, will proceed spontaneously in one direction or the other depending upon the temperature of the substance in question. Likewise, some chemical reactions can also exhibit temperature-dependent spontaneities. To illustrate this concept, the equation relating free energy change to the enthalpy and entropy changes for the process is considered:
27.9K


