通过聚乙烯酒精膜进行近亚热热的乙醇-水混合物蒸发:对工艺效率的参数研究
Cristiana Luminița Gîjiu1, Daniel Dumitru Dinculescu1, Raluca Isopescu1
1Faculty of Chemical Engineering and Biotechnologies, National University of Science and Technology POLITEHNICA Bucharest, 011061 Bucharest, Romania.
Polymers
|January 10, 2026
概括
这项研究优化了聚乙醇 (PVA) 膜蒸发以进行乙醇-水分离. 靠近亚热的最佳条件可以实现高乙醇回收,平衡纯度和数量.
科学领域:
- 化学工程是化学工程的重要组成部分.
- 膜科学 膜科学 膜科学
- 分离过程 分离过程.
背景情况:
- 蒸发是分离液体混合物的关键技术.
- 聚乙烯醇 (PVA) 膜显示出对乙醇-水分离的前景.
- 优化操作条件对于高效的蒸发至关重要.
研究的目的:
- 为了研究操作参数对乙醇-水混合物的PVA膜蒸发性能的影响.
- 确定最大限度地提高乙醇纯度和回收的最佳条件.
- 开发用于预测蒸发效率的统计模型.
主要方法:
- 使用COMSOL Multiphysics® 6.3进行过程模拟.
- 在实验规划中采用了Box-Behnken设计.
- 分析了料成分,温度和透压力的影响.
主要成果:
- 最佳的条件 (大约. 100°C,4-5kPa) 能在亚热附近产生高乙醇回收率 (>99%).
- 含水量高和含水量低的混合物显示出出色的回收度.
- 缩的溶液允许在较低温度下进行权衡溶液 (约. 80°C) 的温度.
结论:
- PVA膜是通过蒸发来有效地分离乙醇和水的.
- 操作参数显著影响分离效率.
- 这项研究为优化PVA膜蒸发过程提供了宝贵的见解.
相关概念视频
Distillation: Vapor–Liquid Equilibria
4.3K
Distillation is a separation technique that takes advantage of the boiling point properties of disparate elements in a mixture. To perform distillation, we begin by heating a miscible mixture of two liquids with a significant difference in boiling points (at least 20°C). As the solution heats up and reaches the bubble point of the more volatile component, some molecules of the more volatile component transition into the gas phase and travel upward into the condenser, which is a glass tube...
4.3K
Vapor Pressure
38.8K
When a liquid vaporizes in a closed container, gas molecules cannot escape. As these gas phase molecules move randomly about, they will occasionally collide with the surface of the condensed phase, and in some cases, these collisions will result in the molecules re-entering the condensed phase. The change from the gas phase to the liquid is called condensation. When the rate of condensation becomes equal to the rate of vaporization, neither the amount of the liquid nor the amount of the vapor...
38.8K
Osmosis and Osmotic Pressure of Solutions
45.8K
A number of natural and synthetic materials exhibit selective permeation, meaning that only molecules or ions of a certain size, shape, polarity, charge, and so forth, are capable of passing through (permeating) the material. Biological cell membranes provide elegant examples of selective permeation in nature, while dialysis tubing used to remove metabolic wastes from blood is a more simplistic technological example. Regardless of how they may be fabricated, these materials are generally...
45.8K
Ideal Solutions
22.1K
According to Raoult’s law, the partial vapor pressure of a solvent in a solution is equal or identical to the vapor pressure of the pure solvent multiplied by its mole fraction in the solution. However, Raoult's Law is only valid for ideal solutions. For a solution to be ideal, the solvent-solute interaction must be just as strong as a solvent-solvent or solute-solute interaction. This suggests that both the solute and the solvent would use the same amount of energy to escape to the...
22.1K
Membrane Fluidity
172.4K
Cell membranes are composed of phospholipids, proteins, and carbohydrates loosely attached to one another through chemical interactions. Molecules are generally able to move about in the plane of the membrane, giving the membrane its flexible nature called fluidity. Two other features of the membrane contribute to membrane fluidity: the chemical structure of the phospholipids and the presence of cholesterol in the membrane.
172.4K
Ethers from Alcohols: Alcohol Dehydration and Williamson Ether Synthesis
12.6K
Overview
Ethers can be prepared from organic compounds by various methods. Some of them are discussed below,
Preparation of Ethers by Alcohol Dehydration
In this method, in the presence of protic acids, alcohol dehydrates to produce alkenes and ethers under different conditions. For example, in the presence of sulphuric acid, dehydration of ethanol at 413 K yields ethoxyethane, whereas it yields ethene at 443 K.
Ethers can be prepared from organic compounds by various methods. Some of them are discussed below,
Preparation of Ethers by Alcohol Dehydration
In this method, in the presence of protic acids, alcohol dehydrates to produce alkenes and ethers under different conditions. For example, in the presence of sulphuric acid, dehydration of ethanol at 413 K yields ethoxyethane, whereas it yields ethene at 443 K.
12.6K


