一键蛋安全检查:一个注射器集成的便携式平台,用于现场检测诺基诺残留物
Yingying Feng1, Wanqi Jiang1, Wenya Liu1
1Key Laboratory of Jianghuai Agricultural Product Fine Processing and Resource Utilization of Ministry of Agriculture and Rural Affairs, College of Food and Nutrition, Anhui Agricultural University, Hefei 230036, China.
ACS sensors
|January 22, 2026
概括
一种新设备使用比度光探针快速检测卵子中的诺基诺 (FQ) 抗生素残留物. 这种便携式,无仪器的平台提供了敏感的现场食品安全监测.
科学领域:
- 分析化学 分析化学
- 材料科学 材料科学 材料科学
- 食品科学 食品科学 食品科学
背景情况:
- 诺基诺 (FQ) 抗生素在家禽中被广泛使用,这引发了人们对食品中的残留物的担忧.
- 准确和快速的检测方法对于确保食品安全和预防抗菌素耐药性至关重要.
- 现有的检测方法可能耗时,昂贵或需要专门的实验室设备.
研究的目的:
- 开发一个便携式的,集成的传感器,用于快速现场检测家禽蛋中的化 (FQ) 残留物.
- 创建一个比度光探头,用于对FQ残留物的敏感和定量分析.
- 建立一个实用且具有成本效益的食品安全监测平台.
主要方法:
- 开发一个便携式传感器,集成Tb3+/DTE-Cu NC比度光探头和双层过装置 (玻璃羊毛和PVA/SA水凝).
- 在水凝矩阵内通过物理拦截和化学吸附进行现场样本净化.
- 在紫外线下的光检测和使用智能手机捕获的RGB值 (G/R比率) 的定量分析.
主要成果:
- 集成装置成功检测了家禽蛋中的诺基诺残留物,其低检测极限为1.6nM.
- 刺卵样本的恢复率在91%至112%之间,显示出高精度.
- 该设备在一个单一的,集成的单元中实现了完整的"样本引入-过-检测"过程.
结论:
- 开发的便携式传感器提供了一个低成本,快速和无仪器的解决方案,用于对抗生素残留物的敏感现场监测.
- 这项技术通过检测家禽产品中的化诺污染物来提高食品安全的实用方法.
- 集成的比度光探测器和过系统为各种食品矩阵的实时分析提供了一个强大的平台.
相关概念视频
01:26Residual Stresses
603
Residual stresses reside in a structure even after removing the original stress inducer. This phenomenon often arises from varied plastic deformations across different parts of a structure. Consider a rod stretched beyond its yield point. It will not regain its original length due to permanent deformation. Even after load removal, the rod does not entirely lose stress because of uneven plastic deformations, resulting in residual stresses. The computation of these stresses in structures is...
603
01:07Residual Plots
6.2K
A residual plot is a statistical representation of data used to analyze correlation and regression results. It helps verify the requirements for drawing specific conclusions about correlation and regression. To obtain the residual plot, first, the residual for each data value is calculated, which is simply the vertical distance between the observed and the predicted value obtained from the regression equation.
When the residual values are plotted against the variable x, it is called a residual...
When the residual values are plotted against the variable x, it is called a residual...
6.2K
01:28Survey Safety
374
Surveying near highways, rough terrain, or power lines involves significant risks. Working along highways is particularly dangerous and requires the use of warning signs and flagmen. It is safest to avoid working directly on roads and use offsets whenever possible. When highway work is unavoidable, it must follow all safety guidelines. Surveyors should wear bright clothing, such as orange reflective vests, to ensure visibility to motorists, coworkers, and hunters. In construction zones, wearing...
374
01:29Protein Folding Quality Check in the RER
5.1K
ER is the primary site for the maturation and folding of soluble and transmembrane secretory proteins. The calnexin cycle is a specific chaperone system that folds and assesses the confirmation of N-glycosylated proteins before they can exit the ER lumen. The primary players of this quality check pipeline are the lectins, ER-resident chaperones, and a glucosyl transferase enzyme. In case the calnexin system in the lumen fails to salvage a misfolded protein, it is transported to the cytoplasm...
5.1K
01:10Residual Stresses in Circular Shafts
517
In materials that exhibit elastic and plastic behavior, known as elastoplastic materials, residual stresses can accumulate when these materials experience plastic deformation. This deformation arises from either high levels of shearing stress or significant strains. Residual stresses are internal stresses that persist within a material after removing the external force causing deformation. This phenomenon is demonstrated when observing the behavior of a shaft under torque; notably, the...
517
01:18Residual Stresses in Bending
534
In the study of elastoplastic members subjected to bending moments, understanding the loading and unloading phases is crucial for assessing material behavior and structural integrity. During the loading phase, as the bending moment increases, the material initially responds elastically, adhering to Hooke's Law, where stress is directly proportional to strain. When the load exceeds the yield strength, plastic deformation occurs, resulting in permanent strain and deformation that remains even...
534