阻碍系统含有悬浮滴和纳米级的即将到来的滴
Liwei Sun1, Yi Guo2, Tianshi Yang3
1School of Mechanical Engineering, Changchun Technical University of Automobile, Changchun, China.
PloS one
|February 2, 2026
概括
二元纳米滴碰撞动态使用分子动态 (MD) 模拟. 增加的分离距离 (Dsep) 会延迟碰撞,而更高的韦伯数 (We) 会推进碰撞,从而影响传播和接触时间.
科学领域:
- 纳米技术纳米技术
- 流体动力学 流体动力学
- 表面科学是一门学科.
背景情况:
- 纳米级二元滴滴撞击对于微流体学和芯片上的实验室设备至关重要.
- 了解滴滴互动动力学是优化这些技术的关键.
研究的目的:
- 通过分子动力学 (MD) 模拟来研究对二元纳米滴产生影响的自由进化.
- 分析滴滴分离距离 (Dsep) 和影响韦伯数 (We) 对传播和接触时间的影响.
主要方法:
- 用分子动力学 (MD) 模拟来建模二元纳米滴的碰撞和扩散.
- 系统动态在不同的Dsep和We条件下被捕获.
主要成果:
- 滴滴表现出初级和二级扩散,可能导致沉积或反弹.
- 增加Dsep会推迟碰撞;增加We会推迟碰撞.
- Dsep影响二次扩散,而We则随着速度的增加而改变二次扩散的前因子从0.06到0.09.
结论:
- 这项研究阐明了二元纳米滴在各种Dsep和We下的冲击动态.
- 结果为指导需要特定滴水冲击条件的实际应用提供了洞察力.
相关概念视频
01:18Second Order systems II
408
In an underdamped second-order system, where the damping ratio ζ is between 0 and 1, a unit-step input results in a transfer function that, when transformed using the inverse Laplace method, reveals the output response. The output exhibits a damped sinusoidal oscillation, and the difference between the input and output is termed the error signal. This error signal also demonstrates damped oscillatory behavior. Eventually, as the system reaches a steady state, the error diminishes to zero.
408
01:21First Order Systems
429
First-order systems, such as RC circuits, are foundational in understanding dynamic systems due to their straightforward input-output relationship. Analyzing their responses to different input functions under zero initial conditions reveals significant insights into system behavior.
When a first-order system is subjected to a unit-step input, its response is characterized by its transfer function. By applying the Laplace transform of the unit-step input to the transfer function, expanding the...
When a first-order system is subjected to a unit-step input, its response is characterized by its transfer function. By applying the Laplace transform of the unit-step input to the transfer function, expanding the...
429
01:20Second Order systems I
598
A servo system exemplifies a second-order system, featuring a proportional controller and load elements that ensure the output position aligns with the input position. The relationship between these components is described by a second-order differential equation. Applying the Laplace transform under zero initial conditions yields the transfer function, showing how inputs are converted to outputs in the system.
By reinterpreting the system, one can derive the closed-loop transfer function, which...
By reinterpreting the system, one can derive the closed-loop transfer function, which...
598
01:06Thermodynamic Systems
8.0K
A thermodynamic system is a set of objects whose thermodynamic properties are of interest. The system is considered to be embedded in its surroundings or the environment. The system and its environment can exchange heat and do work on each other through a boundary that separates them. However, the immediate surroundings of the system interact with it directly and therefore have a much stronger influence on its behavior and properties.
Consider an example of tea boiling in a kettle. The...
Consider an example of tea boiling in a kettle. The...
8.0K
01:26Classification of Systems-I
592
Linearity is a system property characterized by a direct input-output relationship, combining homogeneity and additivity.
Homogeneity dictates that if an input x(t) is multiplied by a constant c, the output y(t) is multiplied by the same constant. Mathematically, this is expressed as:
Homogeneity dictates that if an input x(t) is multiplied by a constant c, the output y(t) is multiplied by the same constant. Mathematically, this is expressed as:
592
01:31Classification of Systems-II
502
Continuous-time systems have continuous input and output signals, with time measured continuously. These systems are generally defined by differential or algebraic equations. For instance, in an RC circuit, the relationship between input and output voltage is expressed through a differential equation derived from Ohm's law and the capacitor relation,
502