相关实验视频

Updated: Feb 26, 2026

Non-aqueous Electrode Processing and Construction of Lithium-ion Coin Cells
12:28

Non-aqueous Electrode Processing and Construction of Lithium-ion Coin Cells

Published on: February 1, 2016

22.3K

在直接回收中最大限度地回收:使用剩余回收层氧化物阴极的再化.

Maura Appleberry1, Xiaolu Yu1,2, Varun Gupta1,2

  • 1Aiiso Yufeng Li Family Department of Chemical and Nano Engineering, University of California, San Diego, La Jolla, California 92093, United States.

ACS applied materials & interfaces
|February 25, 2026
PubMed
概括

这项研究引入了一种用于离子电池回收的新型水热再化方法,该方法利用来自正极材料的剩余,消除了对外部盐的需求. 这种方法提高了可持续性,并将直接回收成本降低约20%.

关键词:
在NCM中使用的阴极材料.在PVDF的分解过程中,直接回收的直接回收.热水复合化是指热水复合的过程.盐的水解是盐的水解.

更多相关视频

Identification and Quantification of Decomposition Mechanisms in Lithium-Ion Batteries; Input to Heat Flow Simulation for Modeling Thermal Runaway11:25

Identification and Quantification of Decomposition Mechanisms in Lithium-Ion Batteries; Input to Heat Flow Simulation for Modeling Thermal Runaway

Published on: March 7, 2022

5.4K
In Situ Neutron Powder Diffraction Using Custom-made Lithium-ion Batteries11:25

In Situ Neutron Powder Diffraction Using Custom-made Lithium-ion Batteries

Published on: November 10, 2014

16.3K

相关概念视频

Electrodeposition01:08

Electrodeposition

Electrodeposition is a technique used to separate an analyte from interferents by electrochemical processes. Here, the analyte is a metal ion that can be deposited on an electrode immersed in the sample solution. The electrochemical setup consists of an anode and a cathode. When an electric current is applied to the setup, oxidation occurs at the anode. At the cathode, which consists of a large metal surface, metal ions undergo reduction and deposit onto the surface.
Electrodeposition can...
1.7K
Extraction: Advanced Methods00:56

Extraction: Advanced Methods

Metal ions can be separated from one another by complexation with organic ligands–the chelating agent– to form uncharged chelates. Here, the chelating agent must contain hydrophobic groups and behave as a weak acid, losing a proton to bind with the metal. Since most organic ligands used in this process are insoluble or undergo oxidation in the aqueous phase, the chelating agent is initially added to the organic phase and extracted into the aqueous phase. The metal-ligand complex is...
1.2K