Multiple oligodeoxyribonucleotide syntheseson a reusable solid-phase CPG support via the hydroquinone-O,O'-diacetic...

A strategy for oligodeoxyribonucleotide synthesis on a reusable CPG solid-phase support, derivatized with hydroxyl groups instead of amino groups, has been developed. Ester linkages, through a base labile hydroquinone- O, O '-diacetic acid ( Q-Linker ) linker arm, were used to couple the first nucleoside to the hydroxyl groups on the support. This coupling was rapidly accomplished (10 min) using O -benzotriazol-1-yl- N, N, N ', N '-tetramethyluronium hexafluorophosphate (HBTU) and 1-hydroxybenzotriazole as the activating reagents. Oligodeoxyribonucleotide synthesis was performed using existing procedures and reagents, except a more labile capping reagent, such as chloro-acetic anhydride, methoxyacetic anhydride or t-butylphenoxyacetic anhydride, was used instead of acetic anhydride. After each oligodeoxyribonucleotide synthesis, the product was cleaved from the support with ammonium hydroxide (3 min) and deprotected as usual. Residual linker arms or capping groups were removed by treatment with ammonium hydroxide/methylamine reagent and the regenerated support was capable of reuse. Up to six different oligodeoxyribonucleotide syntheses or up to 25 cycles of nucleoside derivatization and cleavage were consecutively performed on the reusable support. This method may provide a significant cost advantage over conventional single-use solid supports currently used for the manufacture of antisense oligodeoxyribonucleotides.