Related Experiment Video

Updated: Aug 12, 2026

Design and Analysis for Fall Detection System Simplification
08:05

Design and Analysis for Fall Detection System Simplification

Published on: April 6, 2020

Dan M. Bowers on access control systems and industry trends

D M Bowers

    Hospital Security and Safety Management
    |February 8, 1992
    PubMed

    More Related Videos

    Data Communication Based on MQTT in a Polymer Extrusion Process08:15

    Data Communication Based on MQTT in a Polymer Extrusion Process

    Published on: July 15, 2022

    Microbial Control and Monitoring Strategies for Cleanroom Environments and Cellular Therapies09:30

    Microbial Control and Monitoring Strategies for Cleanroom Environments and Cellular Therapies

    Published on: March 17, 2023

    Related Concept Videos

    Control Systems01:10

    Control Systems

    Control systems are everywhere in contemporary society, influencing diverse applications from aerospace to automated manufacturing. These systems can be found naturally within biological processes, such as blood sugar regulation and heart rate adjustment in response to stress, as well as in man-made systems like elevators and automated vehicles. A control system is essentially a network of subsystems and processes that collaboratively convert specific inputs into desired outputs.
    At the heart...
    PD Controller: Design01:26

    PD Controller: Design

    In automotive engineering, car suspension systems often employ Proportional Derivative (PD) controllers to enhance performance. PD controllers are utilized to adjust the damping force in response to road conditions. A controller, acting as an amplifier with a constant gain, demonstrates proportional control, with output directly mirroring input.
    Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
    Distribution Reliability and Automation01:25

    Distribution Reliability and Automation

    Distribution reliability in electrical power systems is critical for ensuring an uninterrupted power supply to consumers at minimal cost. According to IEEE Standard Terms, reliability is the probability that a device will function without failure over a specified time period or amount of usage. For electric power distribution, this translates to maintaining continuous power supply and addressing customer concerns over power outages. Several indices, as defined by IEEE Standard 1366-2012, are...
    Directional Relays01:25

    Directional Relays

    Directional relays, essential for managing unidirectional fault currents, enhance the safety and efficiency of power systems. On power lines equipped with directional relays, faults downstream (to the right) of the current transformer typically cause the fault current to lag the bus voltage by approximately 90 degrees, known as the forward direction. In contrast, upstream (left-side) faults may result in the fault current leading the bus voltage by nearly 90 degrees, termed the reverse...
    Zones of Protection01:16

    Zones of Protection

    In power systems, the entire setup is divided into protective zones to isolate faults and protect the rest of the network. These zones include generators, transformers, buses, transmission lines, distribution lines, and motors. Each zone can be visualized as a separate room in a house, with each room protected by its own circuit breaker.
    Protective zones are defined by closed dashed lines, containing one or more components. A key characteristic of these zones is the strategic placement of...
    Pilot and Numeric Relaying01:21

    Pilot and Numeric Relaying

    Pilot relaying is a type of differential protection used in power systems. It compares electrical quantities at the terminals of equipment via a communication channel instead of direct relay interconnection. This method is essential for transmission lines where the terminals are far apart, typically up to 80 km for lines with 69 to 115 kV ratings. Four types of communication channels are used for pilot relaying: