Related Experiment Video

Updated: Oct 22, 2026

Scalable Step-by-Step Approach of Sustainable Bioplastic Production from Food Waste
08:14

Scalable Step-by-Step Approach of Sustainable Bioplastic Production from Food Waste

Published on: July 18, 2025

Handling hazardous waste

C Fluke

    Journal of Healthcare Materiel Management
    |January 10, 1988
    PubMed

    Related Concept Videos

    Hazard Analysis and Critical Control Points (HACCP)01:30

    Hazard Analysis and Critical Control Points (HACCP)

    Hazard Analysis and Critical Control Points (HACCP) is a science-based, preventive system used globally to ensure food safety by identifying, evaluating, and controlling biological, chemical, and physical hazards throughout food production. Originally developed by NASA and the Pillsbury Company for astronaut food, HACCP is now a core component of the Codex Alimentarius.HACCP operates on prerequisite programs—such as Good Manufacturing Practices (GMPs), sanitation procedures, and supplier...
    Survey Safety01:28

    Survey Safety

    Surveying near highways, rough terrain, or power lines involves significant risks. Working along highways is particularly dangerous and requires the use of warning signs and flagmen. It is safest to avoid working directly on roads and use offsets whenever possible. When highway work is unavoidable, it must follow all safety guidelines. Surveyors should wear bright clothing, such as orange reflective vests, to ensure visibility to motorists, coworkers, and hunters. In construction zones, wearing...
    Biological Treatment of Effluent and Waste Water01:30

    Biological Treatment of Effluent and Waste Water

    Biological wastewater treatment relies on the metabolic activity of microorganisms to remove pollutants from sewage. In modern treatment systems, this process is organized into sequential stages that progressively reduce solid material, dissolved organic matter, and microbial contamination. Each stage plays a distinct role in improving water quality and preparing the effluent for safe discharge or reuse.Primary and Secondary TreatmentPrimary treatment is a physical process that removes large...
    Pharmaceutical Poisoning: Potential Scenarios01:26

    Pharmaceutical Poisoning: Potential Scenarios

    Pharmaceutical poisoning can occur through various channels, impacting an estimated 2 million hospitalized patients in the U.S. annually with serious adverse drug responses. These scenarios encompass both therapeutic uses, such as drug toxicity, where even standard dosages can lead to severe central nervous system depression, and non-therapeutic exposures, including accidental ingestion by children, and environmental and occupational exposures.Unintentional poisonings often involve exploratory...
    Deleterious Substances in Aggregate01:25

    Deleterious Substances in Aggregate

    Deleterious substances in aggregates can be detrimental to the quality and durability of concrete. These substances include organic impurities like loam, which interfere with cement hydration and are usually present in the sand. These prevent a good bond between aggregate and cement paste. Organic impurities can be detected using the colorimetric test, where the darkness of a solution after agitation indicates the level of organic content.
    Another type of impurity is clay and fine material that...
    PPE Use in Healthcare Settings II: Doffing01:10

    PPE Use in Healthcare Settings II: Doffing

    The sequence of removing or doffing PPE starts with the gloves, as they are the most contaminated. Next is removal of the face shield or goggles, as they would interfere with removing other PPE. Then remove the gown, followed by the mask or respirator. Perform hand hygiene between steps if hands become contaminated and immediately after removing all PPE. Generally, the outside front and sleeves of the isolation gown, the goggles or the mask, the respirator, and the face shield are contaminated.