Related Experiment Video
Updated: Jul 15, 2026

Fabrication, Densification, and Replica Molding of 3D Carbon Nanotube Microstructures
Published on: July 2, 2012
High H2 uptake by alkali-doped carbon nanotubes under ambient pressure and moderate temperatures
1Physics Department, National University of Singapore, 10 Kent Ridge Crescent, Singapore 119260.
Abstract:
Lithium- or potassium-doped carbon nanotubes can absorb approximately 20 or approximately 14 weight percent of hydrogen at moderate (200 degrees to 400 degrees C) or room temperatures, respectively, under ambient pressure. These values are greater than those of metal hydride and cryoadsorption systems. The hydrogen stored in the lithium- or potassium-doped carbon nanotubes can be released at higher temperatures, and the sorption-desorption cycle can be repeated with little decrease in the sorption capacity. The high hydrogen-uptake capacity of these systems may be derived from the special open-edged, layered structure of the carbon nanotubes made from methane, as well as the catalytic effect of alkali metals.
More Related Videos
09:46Adsorption Device Based on a Langatate Crystal Microbalance for High Temperature High Pressure Gas Adsorption in Zeolite H-ZSM-5
Published on: August 25, 2016
10:44Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for Cu(II) Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
Related Concept Videos
¹³C NMR: ¹H–¹³C Decoupling
A broadband decoupling technique is used to simplify these complex, sometimes overlapping, signals. Broadband decoupling relies on a...
Carbon-dioxide Fixation