Numerical simulation of porosity-free titanium dental castings

The objective of this research was to analyse, predict and control the porosity in titanium dental castings by the use of numerical simulation. A commercial software package (MAGMASOFT) was used. In the first part of the study, a model casting (two simplified tooth crowns connected by a connector bar) was simulated to analyse shrinkage porosity. Secondly, gas pores were numerically examined by means of a ball specimen with a "snake" sprue. The numerical simulation results were compared with the experimental casting results, which were made on a centrifugal casting machine. The predicted shrinkage levels coincided well with the experimentally determined levels. Based on the above numerical analyses, an optimised running and gating system design for the crown model was proposed. The numerical filling and solidification results of the ball specimen showed that this simulation model could be helpful for the explanation of the experimentally indicated gas pores. It was concluded that shrinkage porosity in titanium dental casting was predictable, and it could be minimised by improving the running and gating system design. Entrapped gas pores can be explained from the simulation results of the mould filling and solidification.