Related Experiment Video
Updated: Oct 19, 2026

Synthetic, Multi-Layer, Self-Oscillating Vocal Fold Model Fabrication
Published on: December 2, 2011
The artificial throat: a new method for standardization of in vitro experiments with tracheo-oesophageal voice
C Leunisse1, R van Weissenbruch, H J Busscher
1Department of Otorhinolaryngology, University Hospital Groningen Hanzeplein 1, The Netherlands. c.leunisse@kno.azg.nl
Abstract:
After total laryngectomy, the voice can be restored successfully with a silicone tracheo-oesophageal voice prosthesis. Biofilm formation and subsequent deterioration of the silicone material of the prosthesis often limit the mean life of the device to an average of 3-5 months. Although device replacement can be considered an easy outpatient procedure, frequent replacements are inconvenient for the patient and may lead to malfunction of the tracheo-oesophageal fistula. Further understanding of the process of development and inhibition of the colonization of these polymer surfaces requires several comprehensive clinical studies. However, in vivo research of the biomaterials of the voice prostheses is difficult and time consuming. In order to simulate the natural process of biofilm development under dynamic nutrient conditions, an artificial throat was developed. Biofilm developed on Groningen button voice prostheses in vitro could not be distinguished from that formed over several months in vivo. This method can be used as a standardized approach for studying functional and structural aspects of all commercially available indwelling and non-indwelling voice prostheses, including the Groningen button, Provox, Voice Master, Blom-Singer and others under various laboratory conditions.
Related Concept Videos
Tracheostomy: Procedure and Tubes
Tracheostomy tubes can be made of semiflexible plastic (polyurethane or silicone), rigid plastic, or metal, and they come in...
Suctioning the Oropharyngeal Airway
After assembling the equipment, the nurse should practice hand hygiene and don appropriate PPE according to infection control guidelines to avoid the...
Oxygen Delivering System III: Tracheostomy and T-piece
Tracheostomy
A tracheostomy is a surgically created opening (stoma) in the anterior part of the trachea. It is used to establish a patient airway, bypass an upper airway obstruction, simplify the removal of secretions, permit long-term...
Tracheostomy Care II: Procedure
Step 1: Perform hand hygiene, and put on personal protective equipment: gown, gloves, mask and...
Tracheostomy Suctioning II: Procedure
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...

