Improved wettability of an experimental silicone rubber denture soft lining material

The purpose of this study was to improve the wettability of an experimental silicone rubber soft lining material (Sildent) to increase patient comfort. Sildent was modified by the addition of polyalkylene oxide poly(dimethylsiloxane) surfactants. The various surfactants were added directly to the polymeric matrix in the quantities 5, 10, 20% w/w. The surfactants were also added to a one part silicone sealant, which was then painted onto the surface of already cured Sildent. Contact angle measurements were made on samples using a dynamic contact angle analyzer. Results showed that incorporation of surfactants A (Silwet L7600) and B (Silwet L7607) effectively improved the wettability of Sildent. This improvement was still evident after 6 months storage in distilled water at 37 degrees C suggesting retention of the surfactants matrix via physio-chemical bonding. Formulations with surfactants added directly to the matrix showed unacceptable water absorption after 2 months in distilled water. Samples with surfactant charged sealant painted on the surface showed a lower water absorption. In conclusion, Sildent formulations modified with polyalkylene silicone surfactants showed improved wettability compared to unmodified Sildent. Further work is needed to reduce water uptake and determine the effect on key mechanical properties.