Related Experiment Video
Updated: Oct 18, 2026

A Novel Inhalation Mask System to Deliver High Concentrations of Nitric Oxide Gas in Spontaneously Breathing Subjects
Published on: May 4, 2021
Accurate and precise delivery of nitric oxide during high-frequency oscillatory ventilation
1Department of Pediatrics, The Milton S. Hershey Medical Center, Pennsylvania State University College of Medicine, Hershey 17033, USA.
Background:
We have previously described a method for the precise delivery of inhaled nitric oxide (iNO) via a conventional, continuous-flow, pressure-limited, time-cycled ventilator. Because of the augmented effect of iNO decreasing pulmonary vascular resistance with high-frequency oscillatory ventilation (HFOV), we developed and bench tested a system that permits easy and accurate iNO delivery during HFOV.
Method:
The system uses a mass flow controller to deliver fixed volumes of iNO to the HFOV circuit in the range 0 to 20 ppm iNO. The accuracy of the delivery system is based on a comparison of the difference between iNO measured at strategic points in the circuit and the calculated true value.
Results:
The mean difference between the measured and calculated value for iNO (n = 360) was -0.2+/-1.74 ppm (2 SD) (range, 0 to 20 ppm, 0 to 15 Hz). The formation of nitrogen dioxide was <1 ppm at the level of the endotracheal tube.
Conclusion:
The method tests the accuracy of iNO measurements and provides an assessment of the uncertainty over the range of iNO and HFOV settings used clinically.
Related Concept Videos
Mechanical Ventilation II: Invasive Ventilation
Negative-Pressure Ventilators
Negative-pressure ventilators create a vacuum around the chest or body to draw air into the lungs, simulating breathing. This method does not require an...
Mechanical Ventilation III: Noninvasive Ventilation
Noninvasive Positive-Pressure Ventilation (NIPPV)
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
Oxygen Delivering System I: Nasal Cannula and Face Mask
Nasal Cannula
A nasal cannula is a lightweight tube split at one end into two prongs and placed in the nostrils. It is typically used to deliver low to medium levels of oxygen.
Suggested flow rate: The suggested flow rate for a nasal cannula typically ranges between 1 and 6 L/min.
Oxygen percentage setting:...
Nitric Oxide Signaling Pathway
Mechanical Ventilation I: Indication and Settings

