Assessing acute platelet adhesion on opaque metallic and polymeric biomaterials with fiber optic microscopy

The degree of platelet adhesion and subsequent thrombus formation is an important measure of biocompatibility for cardiovascular biomaterials. Traditional methods of quantifying platelet adhesion often are limited by the need for direct optical access, limited spatial resolution, or the lack of temporal resolution. We have developed a new imaging system that utilizes fiber optics and fluorescence microscopy for the quantification of platelet adhesion. This fiber optic remote microscope is capable of imaging individual fluorescently labeled platelets in whole blood on opaque surfaces. Using this method, platelet adhesion was quantified on a series of metallic [low-temperature isotropic carbon (LTIC); titanium alloy (Ti); diamond-like carbon (DLC); oxidized titanium alloy (TiO); and polycrystalline diamond (PCD)] and polymeric [woven Dacron (WD)] collagen-impregnated Dacron (HEM), expanded polytetrafluoroethylene (ePTFE), and denucleated ePTFE (dePTFE)] biomaterials designed for use in cardiovascular applications. These materials were perfused with heparinized whole human blood in an in vitro parallel plate flow chamber. Platelet adhesion after 5 min of perfusion ranged from 3.7 +/- 1.0 (dePTFE) to 16.8 +/- 1.5 (WD) platelets/1000 micrometer. The temporal information revealed by these studies provides a comparative measure of the acute thrombogenicity of these materials as well as some insight into their long-term hemocompatibilities. Also studied here were the effects of wall shear rate and axial position on platelet adhesion. A predicted increase in platelet adhesion with increased wall shear rate and a trend toward a decrease in platelet adhesion with increased axial distance was observed with the fiber optic microscope. Future applications for this imaging technique may include the long-term evaluation of thrombosis in blood-contacting devices in vitro and, in animal models, in vivo.