Related Experiment Video

Updated: Aug 9, 2026

Capturing Flow-weighted Water and Suspended Particulates from Agricultural Canals During Drainage Events
06:26

Capturing Flow-weighted Water and Suspended Particulates from Agricultural Canals During Drainage Events

Published on: November 7, 2017

Determination of Water-Oil Interfacial Area during 3-Phase Gravity Drainage in Porous Media

Schaefer1, DiCarlo, Blunt

  • 1Department of Petroleum Engineering, Stanford University, 367 Panama Street, Room 65, Stanford, California, 94305-2220

Journal of Colloid and Interface Science
|January 13, 2000
PubMed

More Related Videos

Microfluidic Devices for Characterizing Pore-scale Event Processes in Porous Media for Oil Recovery Applications08:38

Microfluidic Devices for Characterizing Pore-scale Event Processes in Porous Media for Oil Recovery Applications

Published on: January 16, 2018

Pore-scale Imaging and Characterization of Hydrocarbon Reservoir Rock Wettability at Subsurface Conditions Using X-ray Microtomography12:18

Pore-scale Imaging and Characterization of Hydrocarbon Reservoir Rock Wettability at Subsurface Conditions Using X-ray Microtomography

Published on: October 21, 2018

Related Concept Videos

Fluid Pressure over Flat Plate of Variable Width01:02

Fluid Pressure over Flat Plate of Variable Width

When a flat plate is submerged in a fluid, the fluid exerts pressure on the plate. This pressure can lead to many different phenomena, including drag and buoyancy. To understand the behavior of the fluid over a flat plate of variable width, it is essential to analyze the distribution of the pressure exerted.
The pressure distribution on the plate can be calculated by determining the force that acts on a differential area strip of the plate. Thus, the magnitude of the force is equal to the...
Major Losses in Pipes01:28

Major Losses in Pipes

When a fluid flows through a pipe, it experiences energy losses due to frictional resistance along the pipe walls, known as major losses. These energy losses result in a pressure drop, which varies based on the flow conditions — whether laminar or turbulent — and the specific physical properties of the fluid and pipe.
Fluid flow can be classified as laminar or turbulent, primarily based on the Reynolds number. This dimensionless number reflects the relative influence of inertial to viscous...
Uniform Depth Channel Flow: Problem Solving01:18

Uniform Depth Channel Flow: Problem Solving

To calculate the flow rate for a trapezoidal channel, first, identify the bottom width, side slope, and flow depth of the channel. The cross-sectional area (A) corresponding to the depth of flow (y), channel bottom width (B), and side slope (θ) is determined by:Next, calculate the wetted perimeter, which includes the bottom width and the sloped side lengths in contact with the water. Using the values of the cross-sectional area and the wetted perimeter, determine the hydraulic radius by...
Gradually Varying Flow01:29

Gradually Varying Flow

Gradually varying flow (GVF) in open channels describes situations where water depth changes slowly along the channel due to factors like non-uniform bed slope, channel shape variations, or obstructions. This flow type occurs when the depth adjusts gradually to balance gravitational forces, shear forces, and energy requirements, resulting in a low rate of depth change.Characteristics of Gradually Varying FlowGVF is commonly observed in natural streams, rivers, and canals, where flow depth...
Design Example: Design of an Irrigation Channel01:27

Design Example: Design of an Irrigation Channel

Trapezoidal channels are widely used in irrigation systems due to their cost-effectiveness and efficiency in conveying water. Trapezoidal channels feature a flat bottom and sloping sides, making them stable and easier to construct compared to other shapes. The bottom width and side slope ratio are determined based on the required flow capacity and site conditions. The side slope is kept gentle for unlined channels to prevent soil erosion.Hydraulic parameters in channel design include the flow...
Applications of Integration to Find Hydrostatic Pressure01:30

Applications of Integration to Find Hydrostatic Pressure

Hydrostatic force is a fluid's total force at rest on a surface. For a horizontal surface submerged at a fixed depth, the pressure is constant and calculated as the product of fluid density, gravitational acceleration, and depth. In the case of a vertical dam wall submerged in water, this force is not evenly distributed due to the increasing pressure with depth. This variation arises from the cumulative weight of the water above each point. Integration is used to account for the continuous...