Related Experiment Video
Updated: Oct 17, 2026

Fluorescent Nanoparticles for the Measurement of Ion Concentration in Biological Systems
Published on: July 4, 2011
Optical sensors for the determination of concentrated hydroxide
Abstract:
An optical sensor system has been developed for the determination of concentrated strong bases ([OH-] = 1-10 M). The base sensors consist of SiO2/ZrO2-organic polymer composites and doped high-pKa indicators. Films were obtained by spin-casting these composite materials on glass substrates and were used as sensor elements for the spectrometric determination of hydroxide. The hydrophilic nature of the mixed oxide SiO2/ZrO2 and its chemical stability in concentrated alkali made it attractive as support in the composites. The organic polymers in the composites either provided better mechanical stability and dye immobilization or enhanced OH- diffusion and sensor response. The composite sensors showed a relative standard deviation of less than 2%. The response time of a SiO2/ZrO2-Nafion composite (sensor 2) was short (5 s), and a small hysteresis was observed during reproducibility measurements with 1-4 M NaOH solutions. The sensors were found to be stable in 4 M NaOH during a 30-day durability test, showing a standard deviation of 3.0-4.7%. The diffusion kinetics and hysteresis performance of the sensors were also evaluated.
Related Concept Videos
Strong Acid and Base Solutions
Titration of Polyprotic Base with a Strong Acid
Titration Calculations: Strong Acid - Strong Base
A titration is carried out for 25.00 mL of 0.100 M HCl (strong acid) with 0.100 M of a strong base NaOH. The pH at different volumes of added base solution can be calculated as follows:
(a) Titrant volume = 0 mL. The solution pH is due to the acid ionization of HCl. Because this is a strong acid, the ionization is complete and the hydronium ion molarity is 0.100 M. The pH of the solution is then:
Indicators
Titration Calculations: Weak Acid - Strong Base
For the titration of 25.00 mL of 0.100 M CH3CO2H with 0.100 M NaOH, the reaction can be represented as:
Factors Affecting Solubility