Nonlinear mechanical behavior of piezocomposites for ultrasonic transducers

A comparative study is carried out between the nonlinear behavior of a composite and the piezoceramic used to obtain it. This characterization is necessary for using the composite in power transducer applications. A study of the losses and the resonator stiffness variations has also been done. Both these effects, as well as the possibility of the frequency hysteresis, show different behavior in the composites, since the increases in the ceramics are different from those in the composites. In this study two measurement methods are used: principally the motional impedance increase with the motional current measurements. The results obtained are normalized in order to make them independent of the resonator size, and thus make the comparison between the composite and the ceramic easier. The figure of the mechanical loss tangent tan delta m versus the mean strain shows that the losses can be greater in the ceramic than in the composite for soft ceramics. The dependence behavior of the losses and stiffness variations versus the mean strain is studied for both resonators.