Biological desulfurization in an optical-fiber photobioreactor using an automatic sunlight collection system

Biological desulfurization using C. thiosulfatophilum has many more advantages over conventional physico-chemical methods due to low operational cost and no production of secondary pollutants. However, it requires effective and economical supply of light energy, which is a key factor in determining the success of commercialization. In this study, optical-fiber photobioreactor with internal illumination system was applied to increase the light availability. Furthermore, sunlight was used as the main light energy in the daytime and metal-halide lamp was applied as an additional light energy at night. Most UV light was eliminated by the chromatic aberration of the aspherical lenses in the solar light collector and 60% of infrared light intensity was eliminated. Physical scratching optical fibers enhanced the light availability about five times as much as that with unscratched ones in the previous study, but it resulted in the adsorption problem of elementary sulfur particles deteriorating light diffusivity considerably in a long operation. In order to solve this problem, scratched optical fibers were inserted into pyrex-glass tubes, which made light diffusivity nearly the same as that without glass tubes. Removal rate per unit cell concentration, using sunlight in the daytime and a metal-halide lamp at night, was 0.41 <0.73 micromol H(2)S min(-1)/(mg protein l(-1)) using a 400 W metal-halide lamp day and night, since the automatic sunlight collection system can transmit the light intensity as only 10% of that with a metal-halide lamp.