Related Experiment Video
Updated: Aug 17, 2026

Imaging In-Stent Restenosis: An Inexpensive, Reliable, and Rapid Preclinical Model
Published on: September 14, 2009
A novel platinum-iridium, potentially gamma radioactive stent: evaluation in a porcine model
B Bhargava1, I De Scheerder, Q B Ping
1Department of Cardiology, Cardiothoracic Sciences Center, All India Institute of Medical Sciences, New Delhi, India. bbhargava@visto.com
Abstract:
In-stent restenosis (ISR) is a major problem within stented arteries. Surface treatment of stents with platinum and gold were found to have the maximum charge with least neointima formation (NF). This study was designed to evaluate platinum (maximum electrical charge) as a material to make stents to reduce NF. Iridium was added to make an alloy suitable for stent manufacture, with the potential to make the stent radioactive. We implanted the novel platinum-iridium (PI) stent in 10 porcine coronaries and compared to the Palmaz-Schatz (PS) stent implanted in 8 coronary arteries. Six weeks after implantation, angiography of the stented vessel was performed before sacrifice. The coronaries were perfusion-fixed and stained, and vessel parameters were analyzed by computer-aided histomorphometry. The thrombus formation and the inflammatory response was less in the PI stent (0.04 +/- 0.1 vs. 0.24 +/- 0.2, P = 0.005; and 1.1 +/- 0.5 vs. 2.4 +/- 0.3, P < 0.001). The NF from PI-stented arteries was smaller in size than the PS controls (1.9 +/- 0.6 mm(2) vs. 2.4 +/- 0.4 mm(2), P = 0.06). However, PI stents presented with higher recoil than the PS stent (16% vs. 5%, P < 0.001). Platinum-iridium is a highly biocompatible material with high performance, low inflammatory response with small NF. This stent does not lead to thrombus formation and has the potential (due to the presence of iridium) to be irradiated to form a gamma radioactive stent. Cathet. Cardiovasc. Intervent. 51:364-368, 2000.
More Related Videos
12:00Evaluation of a Novel Laser-assisted Coronary Anastomotic Connector - the Trinity Clip - in a Porcine Off-pump Bypass Model
Published on: November 24, 2014
06:39Novel Percutaneous Approach for Deployment of 3D Printed Coronary Stenosis Implants in Swine Models of Ischemic Heart Disease
Published on: February 18, 2020