Related Experiment Video
Updated: Aug 19, 2026

Distinctive Capillary Action by Micro-channels in Bone-like Templates can Enhance Recruitment of Cells for Restoration of Large Bony Defect
Published on: September 11, 2015
Characterization and stability of hydroxyapatite coatings prepared by an electrodeposition and alkaline-treatment
1State-Key Laboratory for Mechanical Behavior of Materials, Materials Research Center, Xi'an Jiaotong University, Xi'an 710049, China. yonghan@xjtu.edu.cn
Abstract:
Hydroxyapatite (HA) coatings on titanium alloy substrates were prepared by an alkaline treatment of electrodeposited precursors. The structure, residual stress, and bond strength of the coatings were investigated. Test results showed that the coatings processed in this study exhibited fairly low tensile residual stress, high crystallinity, and were free of an amorphous phase. The bond strength of the coatings increased with the decrease of current density in the range of 0.2-15 mA/cm(2), and reached 14 MPa at 0.2 mA/cm(2). Evaluation of the coatings was performed together with the evaluation of the plasma-sprayed HA coatings immersed in distilled water. It was revealed that the dissolution and bond strength degradation of the coatings were much lower than those of the plasma-sprayed HA coatings.

