Simultaneous STM and UHV electron microscope observation of silicon nanowires extracted from Si(111) surface

A miniaturized scanning tunnelling microscope (STM) was fitted in a side-entry holder of an ultra-high vacuum electron microscope. The clean Si(111)7 x 7 surface was observed by both STM and reflection electron microscopy (REM) at atomic resolution. The tungsten tips were often rounded off upon tip-approach with a constant current, through a gentle touch with the sample surface. The apices of such rounded tips had radii of several tens of granometre with widths of about 3 x 3 nm. Atomically resolved STM of the Si(111)7 x 7 surface was obtainable when an atom or an atomic cluster sits on the tip surface. The rounded tips were used for fabrication of Si nanowires by the touch-and-away operation of the tip. The nanowires grew longer at higher substrate temperature and they reached as long as several tens of nanometre at 700 degrees C. The nanowire had many twins and the (111) twin lamellae were stacked in the direction of the wire axis. In another case, the twin planes were oblique to the wire axis so that the (112) direction was nearly parallel to the wire axis.