Photochemical oxidation of p-chlorophenol by UV/H2O2 and photo-Fenton process. A comparative study

In this study, photochemical advanced oxidation processes (AOPs) utilizing the combinations of UV/H2O2 and the photo-Fenton reaction (UV + classical Fenton reaction) were investigated in lab-scale experiments for the degradation of p-chlorophenol. The study showed that the photo-Fenton process, (a mixture of hydrogen peroxide and ferrous or ferric ion), was the most effective treatment process under acidic conditions and produced a higher rate of degradation of p-chlorophenol at a very short radiation time. It accelerated the oxidation rate by 5-9 times the rate for the UV/H2O2 process. The reaction was found to follow the first order, the reaction was influenced by the pH, the input concentration of H2O2 and the amount of the iron catalyst and the type of iron salt. The experimental results showed that the optimum conditions were obtained at a pH value of 3, with 0.03 mol/l H2O2, and 1 mmol/l Fe(II) for the UV/H2O2/Fe(II) system and 0.01 mol/l H2O2 and, 0.4 mmol/l Fe(III) for the UV/H2O2/Fe(III) system. The reactions were accompanied by the generation of Cl- which reached its maximum value at a short reaction time when using the photo-Fenton process. Finally a rough comparison of the specific energy consumption shows that photo-Fenton process reduced the energy consumption by at least 73 to 83% compared with the UV/H2O2 process.