A review of factors affecting fat absorption in hot chips

Consumption of hot chips is a convenience food in most countries. Unfortunately, these are high in fat and contribute to fat-related diseases in societies with a high fat consumption. There is substantial scope through best-practice deep-frying techniques for producing lower fat, high-quality chips. From a review of the literature, the main factors associated with a lower-fat content of chips are thick (>12 mm), straight cut chips; cryogenic freezing methods; low moisture content of potatoes (specific gravity >1.1); frying fat: chip volume ratio of 6:1; frying at optimal temperature (180 to 185 degrees C) during cooking and turning the temperature down (approximately 140 degrees C) and covering the vats during slack periods; vigorously shaking the basket and hanging it over the deep fryer to drain after frying; maintaining the quality of the frying fat by regularly skimming the cracklings, filtering the fat, and topping up the fryer with fresh fat; keeping the fat turnover <5 days; regular cleaning of frying equipment. It is important that all deep frying operators are adequately trained in these techniques. It is also important that the frying medium is low in saturated and trans fatty acids (<20%) because of their effects on blood lipids and low in linolenic acid (<3%) because it is readily degraded. The widespread implementation of best-practice deep-frying would reduce fat content of hot chips and thus lower overall fat consumption.