Needle-type glucose microbiosensor based on glucose oxidase immobilised in an overoxidised polypyrrole film (an
M Quinto1, I Losito, F Palmisano
1Dipartimento di Chimica, Università degli Studi di Bari, Italy.
Fresenius' Journal of Analytical Chemistry
|February 28, 2001
Abstract:
A fast response, needle-type glucose microbiosensor has been fabricated by a one-step electrochemical immobilisation of glucose oxidase in a polypyrrole film. The sensor shows a remarkable rejection of electroactive interferences, especially paracetamol. The maximum bias observed in the worst situation never exceeded the value of 6%. The fabrication procedure delivered very reproducible devices and the sensitivity of a newly prepared biosensor was typically 650 nA mM(-1) cm(-2). The kinetic parameters, obtained from an existing model, permitted to understand the sensor behaviour.
More Related Videos
Related Concept Videos
01:10Amperometry: Overview
Amperometry is a technique commonly used to measure the concentration of specific analytes in a solution by monitoring the electric current generated during an electrochemical reaction. It involves applying a constant potential between a working electrode and a reference electrode to measure the resulting current, which is proportional to the concentration of the analyte. The Clark oxygen electrode operates based on this principle of amperometry. It consists of a cathode and an anode enclosed...
01:17Microbial Biosensors
Microbial biosensors are analytical devices that utilize living microbes to detect specific substances through measurable signals. These devices consist of two main components: biosensing organisms and signal-transducing elements. Biosensing organisms, such as Escherichia coli or Saccharomyces cerevisiae, are typically housed in multiwell plates connected to transducers, enabling rapid, real-time detection of target analytes.Signal Generation MechanismWhen a target analyte—such as...