Bulk analysis by IR laser ablation inductively coupled plasma atomic emission spectrometry

Two laser ablation systems dedicated to bulk analysis were evaluated for steel and PVC samples, using inductively coupled plasma atomic emission spectrometry detection. These systems were characterized by the use of a Nd:YAG laser operating at 1064 nm, the absence of observation device and a large laser spot size. The 1064 nm wavelength was selected to avoid the use of frequency-multiplying optics, and to be less critical to the sampling position. Calibration graphs and limits of detection are given for both types of materials. LODs were in the range 3-120 microg/g for steel, and in the range 0.07-15 microg/g for PVC. In the case of steel samples, similar calibration graph slopes were obtained between polished and unpolished samples.