Dissolution of molybdenum-silicon (-boron) alloys using a mixture of sulfuric, nitric and hydrofluoric acids and a...

For the major component analysis of Mo-Si (-B) alloys by ICP-AES, an appropriate dissolution method is necessary. The general procedure using a HNO3-HF mixture cannot be applied for Mo-Si (-B) alloys due to Si volatilization followed by violent reaction and due to MoO2 precipitation in the preparation of a Mo standard solution from metallic Mo. Good results were obtained with a mixture of 10 mL H2SO4, 1 mL HNO3, 2 mL HF and 12 mL H2O for Mo-Si (-B) alloys. The samples were completely dissolved at room temperature without any losses. A sequential correction method is also suggested to correct several errors in ICP-AES analysis such as fluctuation in the emission intensities, spectral interferences, non-spectral interferences and blank values.