Ultrasonic integrated backscatter coefficient profiling of human coronary arteries in vitro

A theoretical formulation for the profile of the integrated backscatter coefficient (IBC) is derived. This new formulation is based on a theoretical treatment by Chen et al. [1]. It includes correction for the diffraction of the ultrasonic beam and correction for the non-ideal nature of the reference signal. The inclusion of these correction factors permits accurate quantitative profiling of the IBC over the transducer focal zone. Experimental measurements are first performed on well-calibrated vessel-equivalent phantom materials and subsequently on human coronary arteries in vitro. A spherically focused 50.0 MHz f/1.83 transducer is used. IBC profiles are shown for three samples that are representative of early, mid, and advanced atherosclerotic coronary disease. The IBC profiles clearly differentiate the arterial tissues. However, variation between samples with histologically confirmed intimal thickening (N = 24) was large. The mean IBC (+/- 1 standard deviation), in (Sr.mm)-1, for media, adventitia, and thickened intima were 3.86 x 10(-3), 1.53 x 10(-2), and 2.24 x 10(-2), respectively. The mean IBC of thickened intima is larger than previous measurements obtained from femoral arteries, and the mean IBC for media and adventitia layers are lower, reflecting differences in tissue composition between coronary and femoral vessels.