Fermentation and costs of fuel ethanol from corn with Quick-Germ process

The Quick-Germ process developed at the University of Illinois at Urbana-Champaign is a way to obtain corn oil, but with lower capital costs than the traditional wet-milling process. Quick-Germ has the potential to increase the coproduct credits and profitability of the existing dry-grind fuel ethanol process, but the fermentability of the corn remaining after oil recovery has not been tested. Therefore, a series of pilot scale (50 L) fermentations was carefully controlled and monitored with unique methods for standard inoculation and automatic sampling. It was found that the concentration of suspended solids was significantly reduced in the Quick-Germ fermentations. When compared at the same concentration of fermentable sugars, the fermentation rate and yield were not statistically different from controls. When Quick-Germ was integrated into a state-of-the-art dry-grind fuel ethanol process, computer simulation and cost models indicated savings of approx $0.01/L of ethanol ($0.04/gal) with the Quick-Germ process. Additional savings associated with the lower suspended solids could not be quantified and were not included. However, the savings are sensitive to the price of corn oil.