Related Experiment Video
Updated: Aug 14, 2026
Movement Retraining using Real-time Feedback of Performance
Published on: January 17, 2013
Some effects of camera placement on the accuracy of the Kinemetrix three-dimensional motion analysis system
M J Thornton1, M C Morrissey, F J Coutts
1Department of Health Sciences, University of East London, London, UK.
Objective:
To assess the accuracy of the Kinemetrix motion analysis system to measure horizontal movement by a single reflective marker away from two cameras with differing camera placements.
Design:
Trial of the effects of nine different camera arrangements on precision of non-human movement.
Background:
In many cases the ability to arrange cameras to allow a separation of 60 degrees is not possible. Little is known about the precision of motion analysis systems for small camera angle separations.
Methods:
The accuracy of the Kinemetrix system was assessed with camera horizontal separations of 15 degrees, 30 degrees and 45 degrees, and vertical separations of 0 degrees, 15 degrees and 30 degrees rendering nine different camera placements. The distance between the cameras and the object was always maintained at 4 m. During each test the marker was moved a known horizontal distance along a line bisecting the horizontal angular separation of the two cameras. The mean absolute errors of the Kinemetrix measurement were calculated.
Results:
At the smallest camera separation tested (15 degrees horizontal, 0 degrees vertical), the Kinemetrix was unable to calculate the three-dimensional co-ordinate of the marker. For all other camera positions tested, the errors in measurements were small (mean absolute errors < 2 mm).
Conclusions:
Maintaining camera horizontal and vertical separations above a sum of 30 degrees is sufficient for clinical testing.
Relevance:
Motion analysis systems are becoming more common for clinical evaluation where only confined testing areas are available. These confined areas often make positioning of cameras at greater than 60 degrees impossible; therefore, there is a need to explore the errors involved in placing two cameras at less than 60 degrees.
