Visualization of acoustic radiation from a vibrating bowling ball

This paper presents visualization of acoustic radiation from a vibrating bowling ball using the Helmholtz equation least squares (HELS) method. In conducting the experiments, the ball is excited by a vibration shaker using stationary random signals. The radiated acoustic pressures are measured using two microphones and taken as input to the HELS formulations. The reconstructed acoustic pressures on the bowling ball surface are compared with those measured at the same locations. Also shown are comparisons of the reconstructed and measured acoustic pressure spectra at various locations on the bowling ball surface. Results demonstrate that the accuracy of reconstruction based on measurements over a conformal surface is much higher than that over a finite planar surface. This is because the latter often extends beyond the near-field region, making the accuracy of measurements inconsistent. Nevertheless, satisfactory reconstruction of acoustic pressure fields over the entire bowling ball surface can still be obtained based on the measurements taken over a finite planar surface on one side of the source. In a similar manner, the normal component of the surface velocity is reconstructed. Once these acoustic quantities are determined, the time-averaged acoustic intensity is calculated. Also presented are the formulations for estimating a priori the numbers of expansion functions and measurements required by the HELS method and the guidelines for determining the reconstruction error and optimum measurement locations, given the overall dimensions of the source and the highest frequency of interest in reconstruction.