Thin layer molecularly imprinted microfiltration membranes by photofunctionalization using a coated alpha-cleavage...

A novel approach towards thin-layer molecularly imprinted polymer (MIP) composite membranes was developed based on using benzoin ethyl ether (BEE), a very efficient alpha-scission photoinitiator. The triazine herbicide desmetryn was used as the template, and a mixture of the functional monomer 2-acrylamido-2-methyl-1-propane sulfonic acid (AMPS) and the cross-linker N,N'-methylene-bis-acrylamide (MBAA) in methanol was copolymerised via photoinitiation followed by deposition on the surface of either hydrophobic or hydrophilically precoated polyvinylidene fluoride (PVDF) microfiltration membranes. Blanks were prepared under identical conditions, but without the template. Especially, the degree of functionalization (DF) of the PVDF membranes with poly(AMPS-co-MBAA), the membrane permeabilities and non-specific vs. MIP-specific template binding from aqueous solutions during fast filtration were studied in detail to evaluate the effects of the preparation conditions, in particular the coating of the membrane surface with the photoinitiator prior to UV irradiation and the influence of the precoated hydrophilic layer on PVDF. Significant template specificities of the MIP membranes compared with the blanks were only achieved for the preparations including coating the two types of PVDF membranes with BEE. In contrast, a homogeneous photoinitiation of the copolymerisation in the membrane pore volume yielded functional layers with similar DF but with only non-specific desmetryn binding. All data clearly indicate the significant contribution of MIP stabilization by the support material in layers of optimum thickness to the MIP specificity. Main advantages of the novel approach are the potential to synthesize MIP composite membranes by controlled deposition onto any kind of polymer support, and the very fast MIP preparations due to a very efficient photoinitiator and small MIP layer thickness. Due to the mechanical and chemical stability in combination with high permeabilities, thin-layer MIP composite membranes have a large application potential, e.g., in solid phase extraction.