Down and out in Murray Hill

During the 1950s, the landmark Robbers Cave experiment demonstrated that when groups must compete with one another, intergroup conflict, hostility, and even violence may result. At the Oklahoman summer camp, two troops of boys—termed the Rattlers and the Eagles—took part in a week-long tournament. During this time, their negativity culminated in derogatory name-calling, fistfights, and even vandalism and destruction of property. However, this work also revealed that such tension could be...

Cavity walls feature a hollow space between the outer and inner wythes, connected only by corrosion-resistant metal ties. When water seeps through the outer wythe, it descends within this cavity, intercepted by flashing and eventually exiting through weep holes. To enhance moisture resistance, the inner wythe's cavity side often receives damp-proofing, doubling as an air barrier. The cavity can also house insulation to mitigate heat transfer.
Maintaining a clean cavity during construction is...

Masonry curtain walls employ brick or stone veneers supported by the building's structure to form an external cladding system that is both aesthetically appealing and functional. These walls are erected through two principal techniques, first by traditional layering of masonry units and second by using prefabricated panels. Traditional construction relies on steel shelf angles attached to the spandrel beam for support, with high-bond mortars ensuring secure attachment of masonry veneer units.

The construction of masonry paving involves using materials such as bricks, stones, and concrete masonry units. These materials are chosen for their shape, color, strength, and resistance to abrasion and weathering. Masonry units can be installed dry on a thin layer of sand and a gravel base, or they can be embedded in mortar or asphalt on a concrete slab. For areas subjected to heavy vehicular loads, a rigid base layer of reinforced or unreinforced concrete is recommended. In contrast,...

Vertical curves are essential in roadway design because they provide smooth transitions between varying roadway grades. Designing vertical curves involves calculating intermediate elevations and identifying the curve's highest or lowest point, which is essential for optimal roadway performance.Intermediate elevations on a vertical curve are determined using the tangent offset method. This method considers the initial elevation at the start of the curve, the grades, and the curve's geometry. The...

A surface defined by a function of two variables can be visualized as a vast, uneven terrain, where each point is identified using Cartesian coordinates. The elevation of the terrain at any point is determined by a function that assigns a height value to every pair of horizontal coordinates. This representation allows the surface to be studied in terms of how its height varies across different directions.At a specific point on this terrain, understanding how the height changes requires...