A quartz crystal microbalance sensor for the detection of formic acid vapors

A new quartz crystal microbalance sensor is developed to determine formic acid at low concentrations. Four previously selected polymers with acid-base characteristics were tested as possible coatings. Polyoxyethylene bis [amine] presented the best results. The sensor is rapid, sensitive [0.67 Hz/(mg/m3)], and reversible at low concentrations. The detection limit for formic acid (7.2 mg/m3) is comparable with the short term exposure limit and the threshold limit values. It presents a fast mechanical response to pressure changes, so that it can be quickly used in different environments and situations. The sensor also shows a good stability in a temperature range typical of work atmospheres (16-36 degrees C). It has a wide linear range (7.2-911.2 mg/m3) and a long useful time. It is also applicable to other low molecular mass carboxylic acids such as acetic acid.