Reversed-phase electrochromatography of amino acids and peptides using porous polymer monoliths

Efficient and rapid separation of minute levels of amino acids and bioactive peptides is of significant importance in the emerging field of proteomics as well as in the clinical and pharmaceutical arena. We have developed novel UV-initiated acrylate-based porous polymer monoliths as stationary phases for capillary- and chip-electrochromatography of cationic, anionic, and neutral amino acids and peptides, followed by absorbance or laser-induced fluorescence detection. The rigid monoliths are cast-to-shape and are tunable for charge and hydrophobicity. For separations at low pH, monoliths containing quaternary amine moieties were used to achieve high electroosmotic flow, and for high pH separations monoliths with acidic sulfonic acid groups were employed. Efficient and reproducible separations of phenylthiohydantoin-labeled amino acids, native peptides, and amino acids and peptides labeled with naphthalene-2,3-dicarboxaldehyde (NDA) were achieved using both negatively- and positively-charged polymer monoliths in capillaries. Separation efficiencies in the range of 65,000-371,000 plates/m were obtained with capillary electrochromatography. Buffer composition and the degree of column hydrophobicity were studied systematically to optimize separations. The monoliths were also cast in the microchannels of glass chips and electrochromatographic separation followed by laser-induced fluorescence detection of three NDA-labeled bioactive peptides was obtained.